LG LHY-518 Owners Manual - Page 35

HOOKUP Before Operation (Continued) General Explanation of On-Screen Display This manual gives basic instructions for operating the Recorder Combi Receiver. Some DVDs require specific operation or allow only limited operation during playback. When this occurs, the symbol appears on the TV screen, indicating that the operation is not permitted by the Recorder Combi Receiver or is not available on the disc. Displaying Information on-screen You can display various information about the disc or tape loaded on-screen. On-screen display operation 1 Press DISPLAY repeatedly to display/change the information displayed on-screen. 2 To remove the on-screen display, press DISPLAY or RETURN (O) repeatedly until it disappears. See the descriptions on pages 36 and 37 for detailed explanations of on-screen displays for each media type. otes Some discs may not provide all the features shown in the on-screen display examples. The on-screen display disappears automatically if no button is pressed for seven seconds. Temporary Feedback Icons Resume play from this point Action prohibited or not available Displaying OSD While Watching TV While watching TV, press DISPLAY to display/ remove the on-screen display. For example, when a DVD-RW in VR mode is inserted, you would see a screen similar to the folIndicates disc type. Indicates the Recording mode, Indicates channel lownumber and ing: audio input free space, and elapsed time signal received progress bar. by the tuner. Changing TV Channels If no disc is playing, you can change TV channels using the number or TRK/PRESET (+/-) (v / V) buttons on the Remote Control. ote Antenna channels are numbered 2 through 69. Cable channels are numbered 1 through 125. Changing TV Audio Channel Some TV programs are broadcast with both a main and a Secondary Audio Program (SAP). You can change the TV audio using the AUDIO button. Press AUDIO repeatedly to change the TV audio, according to Broadcast audio signal as shown below. • STEREO+SAP Audio Signal Stereo → SAP → Mono → Stereo • STEREO Audio Signal Stereo → L → R → Mono → Stereo • SAP Audio Signal Mono → SAP → Mono • MONO Audio Signal Mono The current audio channel is displayed on-screen. • If SAP is selected, but there is no SAP channel being broadcast, you will still hear the main audio (Mono or Stereo) channel. • If the sound is poor quality when set to Stereo, you can often improve it by changing to Mono. • When an external input is selected, the audio channel can be switched only to Stereo. DVD-VR VR Mode SP 1H 32M Free DVD Ch. 6 MONO Mono 03/08/2005 11:35AM Indicates output audio signal. Indicates current date and time. 35