Kyocera ECOSYS FS-4200DN FS-2100DN/4100DN/4200DN/4300DN Operation Guide - Page 295
Thick Paper, Colored Paper, Preprinted Paper, Recycled Paper, Paper Specifications on A-13, Paper
View all Kyocera ECOSYS FS-4200DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 295 highlights
Appendix Thick Paper Fan the stack of paper and align the edges before loading them in the MP tray. Some types of paper have rough edges on the back (those are created when the paper is cut). In this case, put the paper on a flat place and rub the edges once or twice with, for example, a ruler to smooth them. Feeding rough edged paper may cause paper jams. Note If the paper jams even after you smooth it out, load the paper in the MP tray with the leading edge rose up a few millimeters as shown in the illustration. Colored Paper Colored paper should satisfy the same conditions as white bond paper, refer to Paper Specifications on page A-13. In addition, the pigments used in the paper must be able to withstand the heat of fusing during the printing process (up to 200 °C or 392 °F). Preprinted Paper Preprinted paper should satisfy the same conditions as white bond paper, refer to Paper Specifications on page A-13. The preprinted ink must be able to withstand the heat of fusing during the printing process, and must not be affected by silicone oil. Do not use paper with any kind of surface treatment, such as the type of paper commonly used for calendars. Recycled Paper Select recycled paper that meets the same specifications as the white bond paper except for whiteness, refer to Paper Specifications on page A-13. Note Before purchasing recycled paper, test a sample on the machine and check that the printing quality is satisfactory. A-21