Konica Minolta AccurioPress C7100 UK-301 Auto Inspection User Guide - Page 54
Click [Reference Image Management]
View all Konica Minolta AccurioPress C7100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
KONICAMINOLTA CONFIDENTIAL 8-8-6. Set the inspection level and click [Close]. Then click [Start] button. 8. OPERATION PROCEDURE ⚫ Specify the Reference Image Management ID. 8-8-7. Click [Reference Image Management] on the control panel, and check the ID of the ref. image. 8-8-8. Open the job properties. ➢ Tick "Auto inspection". ➢ Tick "Select from reference image ID" on the image tab. ➢ Enter the ID of the ref. image in "Proof ID" on the image tab. 8-8-9. Click [Print] to start output. 8-8-10. During the output in Auto Inspection mode, Auto Inspection button will be displayed. 50
KONICAMINOLTA CONFIDENTIAL
8.
OPERATION PROCEDURE
50
8-8-6.
Set the inspection level and click
[Close].
Then click [Start] button.
⚫
Specify the Reference Image Management ID.
8-8-7.
Click [Reference Image Management]
on the control panel, and check
the ID of the ref. image.
8-8-8.
Open the job properties.
➢
Tick “Auto inspection”.
➢
Tick “Select from reference image ID”
on the image tab.
➢
Enter the ID of the ref. image in
“Proof ID” on the image tab.
8-8-9.
Click [Print] to start output.
8-8-10.
During the output in Auto Inspection mode, Auto Inspection button will be displayed.