Kodak Z612 User Manual - Page 63
Mode-dial-light indicator status - flash not working
UPC - 041771071851
View all Kodak Z612 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Troubleshooting If... Try one or more of the following Picture is too light I Reposition camera to reduce the amount of available light. or overexposed I Turn flash off (page 13). I Move so that the distance between you and the subject is within the effective flash range (page 13). I To automatically set exposure and focus, press the Shutter button halfway. When the AF/AE indicator is green, press the Shutter button completely down to take the picture. I Use P mode to adjust the exposure compensation. Picture is not clear I To automatically set exposure and focus, press the Shutter button halfway. When the AF/AE indicator is green, press the Shutter button completely down to take the picture. I Clean the lens (page 71). I Make sure camera is not in Macro AF mode if you are more than 24 in. (61 cm) from your subject. I Place the camera on a flat, steady surface or use a tripod, especially in high-zoom settings or in low light. Mode-dial-light indicator status If... Mode dial light does not turn on and the camera does not work Mode dial light blinks Mode dial light glows steady Try one or more of the following I Turn on the camera (page 3). I Recharge the battery or install a new one (page 2). I Camera may have turned off automatically. Turn on the camera and change the auto power-off setting (see page 36). I Picture is being processed and saved to the camera. Camera is operating normally. I Camera is connected. Camera is operating normally. I Recharge the battery or install a new one (page 2). I Shutter button is pressed halfway down. Focus and exposure are set. Camera is operating normally. I Camera is operating normally. www.kodak.com/go/support 57