KitchenAid UVL5430JSS Ventilation Pairing Guide - Page 4

UNDER CABINET HOODS 30" - KVUB400GSS 36" - KVUB406GSS 30" - KVUB600DSS 36" - KVUB606DSS 30" - KXU2830JSS 36" - KXU2836JSS WALL MOUNT AND ISLAND MOUNT HOODS 30" - KVWB400DSS 36" - KVWB406DSS 30" - KVWB600HBS 36" - KVWB606HBS 36" - KVIB606DSS DOWNDRAFT 30" - KXD4630YSS 36" - KXD4636YSS PRO STYLE VENTILATION AND LINERS 30" - KVUC600JSS 36" - KVUC606JSS 36" - KVWC906JSS 48" - KVWC908JSS 36" - KVWC956JSS 48" - KVWC958JSS 30" - UVL5430JSS* 36" - UVL6036JSS* 48" - UVL6048JSS* GAS COOKTOP AND VENTILATION PAIRING GUIDE GAS COOKTOPS 30" GAS COOKTOPS 36" GAS COOKTOPS KCGS550ESS KCGS950ESS KCGD500GSS KCGD500GSS KCGS550ESS KCGS950ESS KCGD500GSS * Custom hood liners can be used with any of the following blower motors: UXB1200DYS (1,170 CFM), UXI1200DYS (1,200 CFM), UXB0600DYS (585 CFM) ** Motor Class CFM rating Observe all governing codes and ordinances. Have a qualified technician install the range hood. It is the installer's responsibility to comply with installation clearances specified on the model/serial/rating plate. The model/serial/ rating plate is located inside the range hood on the rear wall of the range hood. Canopy range hood location should be away from strong draft areas, such as windows, doors and strong heating vents. Cabinet opening dimensions that are shown must be used. Given dimensions provide minimum clearance. The canopy range hood is factory set for venting through the roof or through the wall. All openings in ceiling and wall where canopy range hood will be installed must be sealed. IMPORTANT: Dimensional specifications are provided for planning purposes only. Do not make any cutouts based on this information. Refer to installation instructions packaged with product before selecting cabinetry, making cutouts or beginning installation.