KitchenAid KXD4630YSS Installation Guide - Page 11
Range Hood Care
![]() |
View all KitchenAid KXD4630YSS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
RANGE HOOD CARE Cleaning IMPORTANT: Clean the hood and grease filters frequently according to the following instructions. Replace grease filters before operating hood. Exterior Surfaces: To avoid damage to the exterior surface, do not use steel wool or soap-filled scouring pads. Replacing a Halogen Lamp Turn off the range hood and allow the halogen lamp to cool. To avoid damage or decreasing the life of the new lamp, do not touch lamp with bare fingers. Replace lamp, using tissue or wearing cotton gloves to handle lamp. Always wipe dry to avoid water marks. Cleaning Method: ■ Liquid detergent soap and water, or all-purpose cleanser ■ Wipe with damp soft cloth or nonabrasive sponge, then rinse with clean water and wipe dry. If new lamps do not operate, make sure the lamps are inserted correctly before calling service. 1. Disconnect power. 2. Push up on the lens and turn it counterclockwise. Metal Grease Filter To Remove Metal Grease Filters: 1. Use 2 hands to remove the metal grease filters. Grasp filter handles, push toward the rear of the range hood and pull down on the front handle to remove. 2. Repeat for each grease filter. 3. Wash metal grease filters as needed in a dishwasher or hand wash in a hot detergent solution to clean. To Reinstall Metal Grease Filters: 1. Grasp filter handles and place rear of filter into rear track. 2. Push down on the rear handle and set the front of the grease filter into the front track to secure. 3. Repeat for each filter. 3. Remove the lamp and replace it with a 120-volt, 50-watt maximum halogen lamp with a GU10 base. Turn it clockwise to lock it into place. 4. Repeat steps 2-3 for the other lamp if needed. 5. Reconnect power. 11
![](/manual_guide/products/kitchenaid-kxd4630yss-installation-guide-d9771dc/11.png)