KitchenAid KUDK03FTBL User Instructions - Page 8
Removable Mid Level and Culinary Tool Racks
UPC - 883049045917
View all KitchenAid KUDK03FTBL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
SURE-HOLD® Cup and Stemware Holder Fold down the extra shelf on the left-hand or right-hand side of the mid level rack to hold additional cups, stemware or long items such as utensils and spatulas. To install rack inserts: Place the insert end legs under the front or back rack wire as shown below. Push down on the center insert wire until it slides into the holding clip on either side of the center in the bottom of the rack. A B NOTE: Remove the culinary tool basket(s) when washing tall stemware or other tall items in the mid level rack. FLEXI-FOLD DOWN™ Flexible Tines The row of tines on the left-hand and right-hand sides of the mid-level rack can be adjusted to make room for a variety of dishes. To adjust the fold-down tines: 1. Grasp the tip of the tine that is in the tine holder. 2. Gently push the tine out of the holder. 3. Lay the tines down, toward the center of the rack. SURE-HOLD® Light Item Clips The light item clips hold lightweight plastic items such as cups, lids, or bowls in place during washing. To move a clip: 1. Pull the clip up and off the tine. 2. Reposition the clip on another tine. Removable Mid Level Rack Inserts Your dishwasher has two removable mid level rack inserts which allow you to adjust the rack to the type of load you are washing. A B A. Lift removable insert wire to remove from holding clips B. Holding clips To remove inserts: Lift up on the insert wire located toward the center of the rack to release the insert from the holding clips. Lift insert out of rack. Removable Mid Level and Culinary Tool Racks The removable racks allow you to wash larger items such as stock A pots, roasters, and cookie sheets in the lower level rack. IMPORTANT: Remove dishes B prior to removing the mid level rack from dishwasher. To remove the rack: 1. To access track stops, pull the rack forward until it stops and clicks into place. A. Track stop B. Track 2. To open track stops, flip the track stop to the outside of the track. 3. After opening both track stops, slide front wheels up and out of the slot in track. Continue to pull rack forward in track and slide the back wheels up and out of the track. 4. Close track stops. 5. Slide rack tracks back into dishwasher. To replace the rack: 1. Gently pull rack tracks forward in dishwasher until they stop and click into place. 2. To open track stops, flip the track stop to the outside of the track. 3. Place the back rack rollers on each side of the rack into the track slot and roll the rack back into the tracks. 4. Insert front rack rollers on each side of the rack into the rack slots. 5. Close track stops on both sides of rack and slide rack back into dishwasher. A. Removable rack inserts B. Insert holding clips 8