KitchenAid KSM70SKXXDR Owners Manual - Page 5
Product Assembly
![]() |
View all KitchenAid KSM70SKXXDR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
ENGLISH PRODUCT ASSEMBLY 1 2 0 .5 1 2 3 4 5 6 7 8 9 10 Spring Latch Locating Pin Turn the Stand Mixer to "0" (OFF) and then Unplug. To attach the Bowl: Fit the Bowl Supports over Locating Pins and press down on back of the Bowl until Bowl Pin snaps into Spring Latch. 3 Pin To Remove Bowl: Place Bowl-Lift Lever in the down position. Grasp Bowl Handle and lift straight up and off Locating Pins. 4 To attach the Accessory: Slip the accessory onto the shaft. Turn to hook it over the Pin on the shaft. To Remove the Accessory: Turn Stand Mixer to "0" (OFF) then unplug. Press accessory upward and turn to the left. Pull down the accessory from Beater Shaft. IMPORTANT: If the Bowl is not securely snapped into place, it will be unstable and wobble during use. 5 6 To raise the Bowl: Rotate the Bowl-Lift Lever to the straight up position. The Bowl must always be in the raised position when mixing. Test the Beater to Bowl Clearance: Turn Stand Mixer ON and test each speed, making sure the beater does not touch the Bowl during operation. If the Beater is too far away from the bottom or is hitting the Bowl, proceed to next step to make adjustments. 5
![](/manual_guide/products/kitchenaid-ksm70sndxcu-owners-manual-d33cf4c/5.png)