KitchenAid KSM192XDCU Owners Manual - Page 6
Product Assembly
![]() |
View all KitchenAid KSM192XDCU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
PRODUCT ASSEMBLY 3 4 1 2 Place the Bowl* on the Clamping Plate and twist to lock in place. 5 Slide and rotate the accessory, aligning over the pin on the shaft. Unlock the Motor Head and move it down. Then, lock** the head to keep it down. Before mixing, test lock by attempting to raise the Motor Head. (OPTIONAL) To adjust Beater to Bowl Clearance: Tilt and lock** the Motor Head back. Turn the screw slightly counterclockwise (left) to raise the beater, or clockwise (right) to lower it. NOTE: If you over-adjust the screw, the Bowl lock lever may not lock into place. (OPTIONAL) Place the Pouring Shield***: From the front of the Stand Mixer, place the Pouring Shield onto the bowl so that the motor head covers the u-shaped gap in the shield. This will position the pouring chute just to the right of the attachment hub as you face the mixer. Press lightly so that the Easy Snap tabs snap the shield onto the bowl. *The Bowl design and material depend on the Stand Mixer model. **Locking option is available on select models. ***Included with select models only. Also available as an optional accessory. 6
![](/manual_guide/products/kitchenaid-ksm195psca-owners-manual-79bf630/6.png)