KitchenAid KGCD807XSS Dimension Guide - Page 1
KitchenAid KGCD807XSS Manual
![]() |
UPC - 883049202471
View all KitchenAid KGCD807XSS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
30" (76.2 CM) GAS DOWNDRAFT COOKTOP PRODUCT MODEL NUMBERS KGCD807X GAS SUPPLY REQUIREMENTS Type of Gas Natural Gas: This cooktop is design-certified by CSA International for use with Natural gas or, after proper conversion, for use with LP gas. q This cooktop is factory set for use with Natural gas. If converting to LP gas, see the "LP Gas Conversion" instructions provided in the package containing literature. The model/serial rating plate located on the underside of the cooktop base has information on the types of gas that can be used. If the types of gas listed do not include the type of gas available, check with the local gas supplier. LP Gas Conversion: Conversion must be done by a qualified service technician. No attempt shall be made to convert the cooktop from the gas specified on the model/serial rating plate for use with a different gas without consulting the serving gas supplier. See the Gas Conversion instructions provided in the package containing literature. Gas Supply Line q Provide a gas supply line of ³⁄₄" (1.9 cm) rigid pipe to the cooktop location. A smaller size pipe on longer runs may result in insufficient gas supply. Pipe-joint compounds that resist the action of LP gas must be used. Do not use TEFLON®† tape. With LP gas, piping or tubing size should be ¹⁄₂" minimum. Usually, LP gas suppliers determine the size and materials used in the system. Flexible metal appliance connector: q If local codes permit, use a ¹⁄₂" or ³⁄₄" I.D. flexible stainless steel tubing gas connector, designed by CSA to connect the cooktop to the rigid gas supply line. †®TEFLON is a registered trademark of E.I. Du Pont De Nemours and Company. ELECTRICAL REQUIREMENTS q A 120 volt, 60 Hz, AC only, 15-amp, fused electrical circuit is required. A time-delay fuse or circuit breaker is also recommended. It is recommended that a separate circuit serving only this cooktop be provided. PRODUCT DIMENSIONS 30" (76.2 cm) Cooktop A CUTOUT DIMENSIONS H I J A B D C E F G A. 28⁵⁄₈" (72.7 cm) maximum B. 19 50.6 cm) maximum C. 9 21.6 cm) D. 6 17.2 cm) E. 2¹⁄₈" (5.4 cm) minimum space to front edge of cooktop F. Floor exhaust option G. 6¹⁄₈" (15.6 cm) for 6" (15.2 cm) vent system and 5¹⁄₈" (13.1 cm) for 5" (12.7 cm) vent system H. 9 21.6 cm) I. 13³⁄₈" (33.9 cm) from the top of the countertop surface J. Wall exhaust option A B C D E F B C A. 21 54.8 cm) with stainless steel trim or 21½" (54.6 cm) without stainless steel trim B. 19 50.1 cm) screw head to screw head C. Model/serial rating/clearance plate location Because Whirlpool Corporation policy includes a continuous commitment to improve our products, we reserve the right to change materials and specifications without notice. G H I J A. 29 76.1 cm) without stainless steel trim B. 30 76.3 cm) with stainless steel trim C. 12 31.6 cm) centerline of cooktop to centerline of gas manifold pipe D. 7 18.6 cm) E. 3 9.2 cm) F. 15" (38.1 cm) G. 2 5.5 cm) recommended minimum cabinet to motor clearance H. 14 36.4 cm) I. 11 29.9 cm) J. 28³⁄₈" (72.1 cm) screw head to screw head Page 1 of 2 Dimensions are for planning purposes only. For complete details, see Installation Instructions packed with product. Specifications subject to change without notice. Ref. W10305290A 8/25/10
![](/manual_guide/products/kitchenaid-kgcd807xss-dimension-guide-d4fc928/1.png)