KitchenAid KFGC500JSC Installation Instructions - Page 4
Installation Requirements, Tools and Parts
View all KitchenAid KFGC500JSC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
INSTALLATION REQUIREMENTS Tools and Parts Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed here. Tools Needed Pipe wrench Adjustable wrench or 5/8" (16 mm) wrench 1/8" x 41/4" (3 mm x 100 mm) flat‑blade screwdriver #2 Phillips screwdriver Drill Level 3/8" (9.5 mm) drive ratchet 15/16" (24 mm) combination wrench Pliers Tubing cutter 1/4" (6.4 mm), 3/8" (9.5 mm), 5/16" (7.9 mm) nut drivers Marker or pencil 3/16" (4.8 mm) carbide tip masonry bit 1/8" (3.2 mm) drill bit Pipe-joint compound resistant to propane gas Noncorrosive leak-detection solution For Propane/Natural Gas Conversions Tape measure Large flat-blade screwdriver Adjustable wrench 7 mm Nut Driver Masking tape 1/2" (1.3 cm) open end wrench Lighter #2 Phillips Screwdriver †®TORX and T20 are trademarks of Acument Intellectual Properties, LLC. 4 T20® Torx®† Driver #1 Square Drive