KitchenAid KFDC558JAV Quick Start Guide - Page 2

WIFI CONNECTIVITY WIFI Connectivity and Remote Operation Models are provided with a WIFI Antenna Module that allows the unit to be remotely operated. The control is capable of monitoring and performing remote operations once the remote enabling function sequence is properly initiated at the appliance. To connect your appliance: 1. Download the KitchenAid™ App from the Google Play® or Apple App Store and create an account. 2. Locate the SAID Label using the diagram on the front of this Guide. 3. Set both the Mode and Temperature Knob to the WIFI mode. 4. Once the knobs are in position, press the pulsing Start Button. 5. When the WIFI Indicator Light to the left of the knob starts blinking white, follow the steps in the app. 6. When the connection is complete the WIFI Indicator Light will turn solid white. 7. To enable remote operations, turn on "Remote Control" in the app. The Remote Indicator Light will turn solid white to signify remote control commands can be sent to the range. For more information on WIFI Connectivity, visit www.kitchenaid.com/connect. MODE AND TEMPERATURE COMPATIBILITY TABLE MODE KNOB Bake Broil Convect Bake Convect Roast Convect Broil Clean WIFI TEMPERATURE KNOB Proof Warm Temperatures (225-500°F) Broil High Broil Low Temperatures (225-500°F) Temperatures (225-500°F) Broil High Broil Low Clean WIFI* *See WIFI Connectivity Section NOTE: When the unit is on, Mode can be changed between Bake, Convect Bake, Convect Roast, and Broil/Convect Broil. Press the Start Button to confirm Mode change. *Appliance must be set to Remote Enable. Features subject to change. Compatible connected appliance required. Details and privacy info at www.kitchenaid.com/connect. CHANGING MODE/TEMPERATURE DURING A CYCLE ACTION EXAMPLE Invalid Mode/ Temperature Combination Made During a Cycle* *Mode and Temperature Compatibility Table If the Temperature is changed during a cycle to a selection that is invalid and the unit was in a previous cycle, the unit will remain in the previous cycle until corrected. The Mode and Temperature Indicator Light will blink to show an invalid selection has been made and will continue to blink until corrected. Mode is in Bake, Temperature is at 350°F (177°C), Start Button is pressed and cycle is running. Then Mode is moved to Broil High. Unit will continue to Bake at 350°F (177°C). Changing Mode Selection During a Cycle If the Mode is changed during a cycle to a selection that is valid, the Start Button will blink to indicate prompt for action. Press the Start Button to begin new Mode selection. If the Mode is moved from Bake to Convect Bake, the Start Button will blink as a prompt for action. Changing Temperature Selection During a Cycle If the Mode is changed during a cycle to a selection that is valid, the Temperature will automatically change. If the Temperature during a Bake cycle is moved from 350°F to 450°F (177°C to 232°C) the unit will Bake at 450°F (232°C). W11114332A ®/™ ©2019 KitchenAid. All rights reserved. All other trademarks are owned by their respective companies. D190462KCA