Kenwood XD-A53 User Manual - Page 29
Select the source to be recorded., Start recording., To pause recording, Selection of the reverse mode
View all Kenwood XD-A53 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
To pause recording (Main unit only) REC/ARM Lights T.EQ AB ÷ Pressing the key pauses recording after leaving a non-recorded space of about 4 seconds. ÷ If the key is pressed again in less than 4 seconds after it has been pressed, recording resumes from that instant. Let's record 29 Selection of the reverse mode REVERSE MODE Each press switches the modes as follows. 1 " " .... Recording stops after having recorded both sides of tape. 2 " " ... Recording stops after having recorded both sides of tape. 3 " " ..... Recording stops after having recorded one side of tape. ÷ When the "2" transport direction indicator is lit, recording always stops after having recorded one side of tape. Basic section Select an input source other than "TAPE A or B". 4 4. Select the source to be recorded. Press the desired key. CD01 1:12 The input source component to be recorded should be displayed. ÷ If a disc has already been loaded when the CD input is selected, it will starts to play automatically. In this case, press the stop (7) key to stop it. ÷ When you select DVD/VIDEO (External input), adjust the input level. t REC/ARM 5 5. Start recording. 1 Start recording. 2 Play (or tune) the input source to be recorded. Lights T.EQ AB ÷ If a disc has already been loaded when the CD input is selected, it will starts recording automatically. ÷ Even if deck A is selected, it is automatically switched to deck B at the start of recording. ÷ Recording stops automatically when the tape side(s) to be recorded have been fully recorded. ÷ Press the stop (7) key of the cassette deck unit to stop recording (see the next page).