Kenwood VR-8050 Instruction Manual - Page 30
Convenient functions, DVD 6-channel playback
View all Kenwood VR-8050 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Ambience effects DVD 6-channel playback Using a DVD player or the like equipped with six (5.1) output channels and the receiver, you can enjoy surround sound playback. Connecting a DVD player which can decode the surround signal itself is also acceptable. Convenient functions STEREO DIMMER MULTI CONTROL INPUT MODE VOLUME CONTROL DVD/6CH Input Mode DVD/6CH VOL / Preparations • Connect your DVD player to the DVD/6CH jacks of the receiver. • Turn on all other components that will be used. • Complete "Preparing for surround sound". & 1 Press "DVD/6CH" as the input source. • If speaker system B is on when "DVD/6CH" is selected as the input source, it switches off and speaker system A turns on automatically. 2 Select "6CH INPUT" by pressing the INPUT MODE key. 3 Start playback of the DVD software. 4 Adjust the volume. • It is not possible to adjust the volume level or sound quality (SET UP, SOUND, LISTEN MODE, ACTIVE EQ, SPEAKER EQ, STEREO, DSP, LOUDNESS and TONE key will not be functional) of the channels separately when the receiver is in the 6CH INPUT mode. Adjust the volume with the controls of the DVD player. For the powered subwoofer, you can adjust the volume of the subwoofer using the subwoofer's own volume control. SOUND TUNER (Multi Sound Dimmer Listen Mode5/ ∞ LISTEN MODE Stereo Adjusting the sound You can make further adjustments to the sound while listening to playback in the surround mode. 1 For the remote control, press and hold the TUNER key for more than 3 seconds to switch to receiver mode. 2 Press the SOUND key and then use the ∧/∨ keys or @/# keys until the desired item appears in the display. Each time you press the ∧/∨ keys or @/# keys, the menu changes as follows: Note that some items are not displayed depending on speaker settings and listening modes. 1 CNTR (Center speaker level adjustment)* 2 SR (Surround Right speaker level adjustment)* 3 SBR (Surround Back Right speaker level adjustment)* 4 SBL (Surround Back Left speaker level adjustment)* 5 SL (Surround Left speaker level adjustment)* 6 SUBW (Subwoofer level adjustment)* 7 INPUT (Input level adjustment - analog mode only) ( 8 MIDNIGHT (Midnight mode ON/OFF - Dolby Digital and DTS mode only) 9 PANORAMA (Panorama mode ON/OFF)** 0 DIMENSION (Dimension adjustment)** - CENTER WIDTH (Center width adjustment)** = DUAL MONO (Dual Mono selection - Dolby Digital mode only) * The adjustment is only temporary for the current input selection. The value will return automatically to the original setup value when the power is turned on/off or when the input selection is changed. ** Pro Logic IIx and Pro Logic II Music mode only. • If you have selected "SB/SW AMP SB", "SBR" and "SBL" are not appeared but "SB" is appeared on the Display. 3 Use the MULTI CONTROL knob or Multi (%/fi) keys to adjust the setting as desired. • The adjustment item is displayed for approximately 20 seconds. 30 EN