Kenwood TK-3312 Operation Manual 1 - Page 25
Priority Scan, Temporary Channel Lockout
View all Kenwood TK-3312 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
SCAN Scan monitors for signals on the transceiver channels. While scanning, the transceiver checks for a signal on each channel and stops only if a matching signal is present. To start/stop scanning, press the key programmed as [Scan]. • The indicator appears during Scan. • When a signal is detected, Scan pauses at that channel. The transceiver will remain on the busy channel until the signal is no longer present, at which time Scan resumes. Note: To use Scan, there must be at least 2 channels added to the scanning sequence. PRIORITY SCAN If a Priority channel has been programmed, the transceiver will automatically change to the Priority channel when a call is received on that channel, even if a call is being received on a normal channel. • The indicator appears when the selected channel is the Priority channel (depending on dealer setting). TEMPORARY CHANNEL LOCKOUT During scan, you can temporarily remove specific channels from the scanning sequence by momentarily pressing the key programmed as [Scan Delete/Add] while Scan is paused at the undesired channel. To temporarily remove a zone, press and hold the [Scan Delete/Add] key while Scan is paused at a channel in the undesired zone. • The channel/zone is no longer scanned. However, when scanning is ended and restarted, the Scan settings return to normal. 13