Kenwood TK-3312 User Manual 1 - Page 24
BASIc oPerATIonS - unlock
![]() |
View all Kenwood TK-3312 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
BASIC OPERATIONS Switching Power ON/ OFF Turn the Power switch/ Volume control clockwise to switch the transceiver ON. • A beep sounds and the display momentarily lights up. • If the Transceiver Password function is programmed, "PASSWORD" appears on the display. Enter the password to unlock the transceiver (refer to "Transceiver Password", below). Turn the Power switch/ Volume control counterclockwise to switch the transceiver OFF. ■ Transceiver Password If your transceiver is password protected, you must first enter the password before you can use the transceiver. 1 Rotate the Selector to select the first digit of the password. 2 Press C> to accept the entry and move to the next digit. • Press A to delete an incorrect digit. 3 Repeat steps 1 and 2 to enter the entire password. • The password can contain a maximum of 6 digits. 4 Press S to confirm the entered password. • If you enter an incorrect password, an error tone sounds and the transceiver remains locked. Adjusting the Volume Rotate the Power switch/ Volume control to adjust the volume. Clockwise increases the volume and counterclockwise decreases it. • You may need to adjust the volume more precisely while communicating with other parties. Note: If your dealer programmed [Squelch Off] or [Squelch Off Momentary] onto a PF key, you can use that key to hear background noise while adjusting the volume level. 11
![](/manual_guide/products/kenwood-tk2312-user-manual-cc4bb7a/24.png)