Kenwood TK-3170 User Manual - Page 51

The Beginning of Transmit and End of Transmit identification

Get Kenwood TK-3170 PDF manuals and user guides View all Kenwood TK-3170 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 51 highlights

BATTERY STATUS INDICATOR The battery status indicator displays the battery power remaining when using an optional battery pack, as illustrated below. (The battery status indicator does not appear while using alkaline batteries.) High Sufficient Low Very Low When the battery power is very low, replace or recharge the battery pack. If activated by your dealer, an alert tone will sound every 30 seconds and the LED indicator will blink red when the battery power is low. BEGINNING/ END OF TRANSMIT SIGNAL The Beginning of Transmit and End of Transmit identification signals are used to access and release some repeaters and telephone systems. If Beginning of Transmit is set, the ID signal is transmitted when you press the PTT switch. If End of Transmit is set, the ID signal is transmitted when you release the PTT switch. If both are set, the ID signal is transmitted when you press and release the PTT switch. 44

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
44
B
ATTERY
S
TATUS
I
NDICATOR
The battery status indicator displays the battery power
remaining when using an optional battery pack, as illustrated
below.
(The battery status indicator does not appear while
using alkaline batteries.)
High
Sufficient
Low
Very Low
When the battery power is very low, replace or recharge the
battery pack.
If activated by your dealer, an alert tone will
sound every 30 seconds and the LED indicator will blink red
when the battery power is low.
B
EGINNING
/ E
ND
OF
T
RANSMIT
S
IGNAL
The Beginning of Transmit and End of Transmit identification
signals are used to access and release some repeaters and
telephone systems.
If Beginning of Transmit is set, the ID signal is transmitted
when you press the
PTT
switch.
If End of Transmit is set, the ID signal is transmitted when you
release the
PTT
switch.
If both are set, the ID signal is transmitted when you press
and release the
PTT
switch.