Kenwood TH-G71E User Manual - Page 45
Programmable Vfo, Changing Speaker Configurations
View all Kenwood TH-G71E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
PROGRAMMABLE VFO If you want, you can set limits for the minimum and maximum frequencies that are selectable using the Tuning control. For example, if you select 436 MHz for the lower limit and 437 MHz for the upper limit, the tunable range will be from 436.000 MHz to 437.975 MHz. This function will be useful if you always check frequencies within a certain range. Note: ◆ You cannot program the 100 kHz and subsequent digits. ◆ The exact 100 kHz and subsequent digits of the upper limit depend on the step size selected. ◆ You can select the lower and upper limits within the allowable receive frequency range that differs depending on the markets. 1 Press [VFO] to select VFO mode. 2 Select the desired band. 3 Press [F], [BAND] to enter Menu mode. 4 Select Menu No. 3 (PROVFO). 5 Press [BAND], then select the lower frequency limit using the Tuning control. 2 1 6 Press [BAND] again, then select the upper frequency limit using the Tuning control. 1 2 1 2 3 7 Press [BAND] once again to complete the setting. 4 8 Press any key other than [BAND], [LAMP], and [MONI] to exit Menu mode. 5 CHANGING SPEAKER CONFIGURATIONS 6 If using an optional speaker microphone, you can select 7 whether you will hear audio from only the speaker microphone or both the speaker microphone and transceiver. The default is "speaker microphone only". 8 1 Press [F], [BAND] to enter Menu Mode. 9 2 Select Menu No. 14 (SP). 10 11 12 3 Press [BAND] to select "ONE" (default) or "BOTH". 13 4 Press any key other than [BAND], [LAMP], and [MONI] to exit Menu mode. 14 15 39