Kenwood NX-700H Instruction Manual 1 - Page 17
Basic Operations
![]() |
View all Kenwood NX-700H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
BASIC OPERATIONS SWITCHING POWER ON/OFF Press and hold the switch for approximately 1 second to turn the transceiver power ON. Press and hold the switch again to turn the transceiver OFF. ■ Transceiver Password If the transceiver is password protected, "PASSWORD" will appear on the display when the power is turned ON. To unlock the transceiver, enter the correct password: 1 Select a character using the and keys. • If you are using a microphone keypad, you can enter the password by direclty pressing the DTMF keys instead. 2 Press the key to enter the selected character. • This step is unnecessary when using a keypad. 3 Repeat steps 1 and 2 to enter the entire password. • Press the key or microphone # key to delete an incorrectly entered character. Press and hold the key or microphone # key to delete all characters. 4 Press the key or microphone key to confirm the entry. • If you enter an incorrect password, an error tone sounds and the transceiver remains locked. • The password can contain a maximum of 6 digits. ADJUSTING THE VOLUME Press the keys programmed with Volume Up/ Volume Down to adjust the volume level. SELECTING A ZONE AND CHANNEL/GROUP ID Select the desired zone using the keys programmed as Zone Up/ Zone Down. Each zone contains a group of channels. Select the desired channel/group ID using the keys programmed as CH/GID Up / CH/GID Down. Each channel/group ID is programmed with settings for transmitting and receiving. Names can be programmed for zones and channels/group IDs. Each name can contain up to 14 characters. • You can toggle the display between the zone and channel/group ID names and number by pressing the key programmed as Display Format, or by accessing the Display Format function through the Menu {page 12}. 9
![](/manual_guide/products/kenwood-nx700-instruction-manual-2f7e160/17.png)