Kenwood NX-410 Instruction Manual 1 - Page 25
Making Individual Calls Digital, Receiving Group Calls Digital, Receiving Individual Calls Digital
View all Kenwood NX-410 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
■ Making Individual Calls (Digital) If a key has been programmed with Individual or Individual + Status, you can make calls to specific persons. 1 Press the key programmed as Individual or Individual + Status. 2 Press / to select a unit ID from the list. • You can enter the unit ID directly, using the DMF keypad. 3 Press and hold the PTT switch to make the call. • Speak into the transceiver as you would during a normal transmission. RECEIVING Select the desired zone and channel. If signaling has been programmed on the selected channel, you will hear a call only if the received signal matches your transceiver settings. Note: Signaling allows your transceiver to code your calls. This will prevent you from listening to unwanted calls. Refer to "SIGNALING" on page 23 for details. ■ Receiving Group Calls (Digital) When you receive a group call on a Conventional channel and the received group ID matches the ID set up on your transceiver, you can hear the caller's voice. When on a Trunking channel, if the Group ID of a received call matches your Group ID, you will hear the call. ■ Receiving Individual Calls (Digital) When you receive an individual call, a ringing tone will sound and the caller's ID will appear on the display. To respond to the call, press and hold the PTT switch and speak into the transceiver as you would during a normal transmission. 11