Kenwood NX-340V Operation Manual 2 - Page 18
Programmable Auxiliary Functions
![]() |
View all Kenwood NX-340V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
PROGRAMMABLE AUXILIARY FUNCTIONS Your dealer can program the Side 1 and Side 2 keys each with one of the functions listed below. Note: The duration of pressing a key to activate a function is dependent on your dealer setting. Your dealer may have set some keys to be held down for a short duration instead of being momentarily pressed. Ask your dealer for details on which keys need to be held down to activate their functions. ■ None No function has been programmed. ■ Autodial 1 Autodial allows you to make a private DTMF call to another party. ■ Call 1/ Call 2 Press to send a FleetSync status, NXDN status, or 2-tone signaling call. ■ Calling Alert 1 A calling alert tone allows you to alert party members that you are making a call. When making a call, first hold down this key. • While holding down the key, the calling alert tone will sound. Release the key to end the tone, then hold down the PTT switch and speak into the microphone to transmit. ■ CW Message 2 Press to transmit the preset Morse code message on your current channel. ■ Emergency Press and hold to enter (or exit) Emergency mode. ■ Key Lock Press to lock/unlock the transceiver keys. Without Status Memory, when the transceiver power is turned OFF and then ON again, the Key Lock function will be cancelled. 8
![](/manual_guide/products/kenwood-nx240-operation-manual-79ce418/18.png)