Kenwood NX-3200 User Manual - Page 50
-tone Signaling (for E Type Only), Selcall Selective Calling, Status Message
![]() |
View all Kenwood NX-3200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
5-TONE SIGNALING (For E type only) 5-tone Signaling is enabled or disabled by your dealer. This function opens the squelch only when the transceiver receives the 5 tones programmed in your transceiver. Transceivers that do not transmit the correct tones will not be heard. SELCALL (SELECTIVE CALLING) A Selcall is a voice call to a station or group of stations. o Transmitting 1 Select your desired zone and channel. 2 Press the button programmed as [Individual]/ [Individual + Status]/ [Individual + Short Message]/ [Group]/ [Group + Status]/ [Group + Short Message] to enter Selcall Mode. Alternatively, press the button programmed as [Menu] to enter Selcall Mode using Individual/ Individual + Status/ Individual + Short Message/ Group/ Group + Status/ Group + Short Message in the Menu Mode. 3 Press the [J] and [K] buttons to select the station you want to call. ● If Manual Dialing is enabled, you can enter the station ID by using the keypad on a full button model Portable transceiver or on the microphone of a Mobile transceiver. 4 Press the button programmed as [Call 1] to [Call 6] and begin your conversation. Note: ● You can also use the buttons programmed as [Digit 1x Down], [Digit 1x Up], [Digit 10x Down], and [Digit 10x Up] to adjust the Selcall number. [Digit 1x Up] and [Digit 1x Down] increases and decreases the Selcall number by 1 respectively each time the button is pressed. [Digit 10x Up] and [Digit 10x Down] increases and decreases the Selcall number by 10 respectively each time the button is pressed. o Receiving When a call containing the correct tones is received, the transceiver will enter Selcall mode. An alert tone will sound and the calling station's ID appears on the display. Press any button to return to normal operation. STATUS MESSAGE You can send and receive Status messages which may be decided in your talk group. Messages can contain up to 16 alphanumeric characters. A maximum of 250 received messages can be stored in the stack memory of your transceiver. o Transmitting 1 Select your desired zone and channel. 2 Press the button programmed as [Status] to enter Status mode (proceed to step 5), or [Individual + Status]/ [Group + Status] to enter Selcall mode (proceed to step 3). 50
![](/manual_guide/products/kenwood-nx3000series-user-manual-a171bae/50.png)