Kenwood NX-320 Operation Manual 1 - Page 29
Receiving A Telephone Call
View all Kenwood NX-320 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
4 When the called party responds, press the PTT switch and speak into the microphone. Release the PTT switch to receive. • Only one person can speak at a time. 5 To end the call, press and hold the PTT switch, then press the # key or the key programmed as [Telephone Disconnect]. RECEIVING A TELEPHONE CALL 1 When a telephone call is received, the transceiver will automatically change to the correct group ID and you will hear the call. • A ringer tone will sound when a call is received. 2 Press and hold the PTT switch to speak, and release it to receive. • Only one person can speak at a time. 3 To end the call, press and hold the PTT switch, then press the # key or the key programmed as [Telephone Disconnect]. 21
21
4
When the called party responds, press the
PTT
switch and
speak into the microphone.
Release the
PTT
switch to
receive.
•
Only one person can speak at a time.
5
To end the call, press and hold the
PTT
switch, then
press the # key or the key programmed as
[Telephone
Disconnect]
.
RECEIVING A TELEPHONE CALL
1
When a telephone call is received, the transceiver will
automatically change to the correct group ID and you will
hear the call.
•
A ringer tone will sound when a call is received.
2
Press and hold the
PTT
switch to speak, and release it to
receive.
•
Only one person can speak at a time.
3
To end the call, press and hold the
PTT
switch, then
press the # key or the key programmed as
[Telephone
Disconnect]
.