Kenwood NX-200S Instruction Manual 1 - Page 16
Preparation
![]() |
View all Kenwood NX-200S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
PREPARATION INSTALLING/ REMOVING THE (OPTIONAL) BATTERY PACK 1 Match the guides of the battery pack with the grooves on the upper rear of the transceiver, then firmly press the battery pack in place. 2 Lock the safety catch to prevent accidentally releasing the battery pack. 3 To remove the battery pack, lift the safety catch, press the release latch, then pull the battery pack away from the transceiver. 1 2 3 Note: ◆ For battery pack charging procedures and usage, refer to the battery charger Instruction Manual. ◆ Before charging a battery pack that is attached to the transceiver, ensure that the safety catch is firmly closed. ◆ While operating the transceiver using a Li-ion battery pack in areas with an ambient temperature of -10°C/ +14°F and lower, operating time may be shortened. ◆ Install the battery pack after cleaning the battery pack contacts and the transceiver terminals. INSTALLING THE (OPTIONAL) ANTENNA Screw the antenna into the connector on the top of the transceiver by holding the antenna at its base and turning it clockwise until secure. Optional antenna 2
![](/manual_guide/products/kenwood-nx200-instruction-manual-f5be049/16.png)