Kenwood NX-1300D User Manual 2 - Page 66
SCAN REVERT, Selected, Selected + Talkback, Priority 1/ Priority 2
![]() |
View all Kenwood NX-1300D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
SCAN REVERT The Scan Revert channel is the channel selected when you press the PTT switch to transmit during scan. Your dealer can program one of the following Scan Revert channels: • Selected: The last channel selected is assigned as the new revert channel. • Selected + Talkback: If the channel has been changed, the newly selected channel is assigned as the new revert channel. The transceiver "talks back" on the current channel. • Priority 1/ Priority 2: If your dealer has programmed a Priority channel (either Priority 1 or Priority 2), this channel is the revert zone-channel. • Priority 1 + Talkback/ Priority 2 + Talkback: If your dealer has programmed a Priority channel (either Priority 1 or Priority 2), this channel is the revert zone-channel. The transceiver "talks back" on the current receive channel. • Last Called + Selected: The last channel on which you received a call is assigned as the new revert channel. The transceiver "talks back" on the current channel. If the channel has been changed, the newly selected channel is assigned as the new revert channel. 66
![](/manual_guide/products/kenwood-nx1200-user-manual-03f5909/66.png)