Kenwood M-820DAB Operation Manual - Page 33
Starting the automatic station search again, Manual tuning of ensembles, Selecting a DAB+ station,
![]() |
View all Kenwood M-820DAB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Starting the automatic station search again • Press the MENU button to retrieve the DAB menu. "FULL SCAN" will show on the display. Start the search with the Enter button. • During the search the display will show the number of stations found so far. • If no stations are found during the search, then "NO DAB" will be displayed for approx. 2 seconds and then change to the display "FULL SCAN". Please then check that the antenna is connected correctly or try to find a different position- for the device to achieve a better reception. Manual tuning of ensembles • Press the MENU button to retrieve the DAB menu. • Press the TUN+ button until "MANUAL" shows in the display. • Using the Enter button, the function is confirmed and the display will show the station which is currently set with the corresponding frequency. • Press the TUN+ or TUN- buttons to manually select another channel. • Confirm selection using the Enter button. Then the signal level will be shown in the display, another press of the button will load the current ensemble. Selecting a DAB+ station The stations saved alphabetically in the stations list can be retrieved as follows: • Press the TUN+ or TUN- buttons on the remote control to scroll backwards or forwards in the stations list. • When you have selected the desired station, press the Enter button on the remote control or wait 2 seconds for the playback to start. "LOADING" appears in the display. • If the reception level for the selected station is not sufficient for trouble-free playback, then"OFF AIR"will appear in the display. Please then select a different station. Saving stations in station memory There are 20 memory spaces available to make it easier to find DAB stations. To assign the memory, proceed as follows: • Select a station to be saved • Press the PRG button until the display flashes and shows a memory space. An empty memory space is indicated by "EMPTY", an assigned space is shown with its frequency. You can also re-assign a memory space which is already in use. • Press the TUN+ or TUN- buttons to select a memory space. • Confirm save using the Enter button. "STORED"flashes briefly on the display. • The stations can now be selected with the or buttons. 13
![](/manual_guide/products/kenwood-m820dab-operation-manual-1b2afc0/33.png)