Kenwood KS-8200HT User Manual - Page 6
On the Wall, On the Desktop or Shelf
View all Kenwood KS-8200HT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
ENGLISH Installation Methods On the Desktop or Shelf Place the speakers on the desktop, shelf or a similar level surface. ÷ The round encircled numerals in the following text refer to the items listed on the "Included parts list" page. ÷ The supplied speaker wires are color-coded according to the speakers to be connected. See the description in "Connections" for details. 7 Front speaker Be sure to remove the plates (small) from the supplied speaker stands and attach the plates (small) to the front speakers. 1 Disassemble the pole assembly into the bottom plate and pole by removing the retaining screws. 2 Disassemble the bottom plate into the plate (small) and plate (large) by removing the retaining screws. 3 Using the screws removed in step 2, attach only the plate (small) to holder A 2. 4 Remove the two screws from above and below the terminal on the rear of the speaker. Distribute the speaker wire through the hole on holder A 2 and then connect it to the terminal on the speaker. Using the screws removed from the speaker, attach holder A 2, together with the plate (small), to the speaker.Attach cushions 7 to the plate (small). The cushions prevent the speaker from sliding, and dampen its vibrations. 1 2 32 4 Screw Plate (small) Bottom plate Insert the speaker wire here. Screw Screw Plate (small) Screw Plate (large) 7 7 Center speaker, Surround speaker Attach cushions to the center speaker and surround speakers as shown below. The cushions prevent the speaker from sliding, and dampen its vibrations. Center speaker Surround speaker 6 5 6 5 5 On the Wall You can hang the front and surround speakers on the wall vertically, and the center speaker horizontally. Preparation To install the front speakers and center speaker on the wall, it is first required to attach the supplied brackets on the rear of the speaker. Remove the two screws from each speaker and, using the removed screws, attach two brackets to the rear of the speaker. Check the top and bottom of each bracket and attach it correctly as shown. The surround speakers have the wall-mount holes made on the rear in advance. Bracket Screw Bracket Screw 6 EN