Kenwood KRF-V8300D User Manual
Kenwood KRF-V8300D Manual
 |
View all Kenwood KRF-V8300D manuals
Add to My Manuals
Save this manual to your list of manuals |
Kenwood KRF-V8300D manual content summary:
- Kenwood KRF-V8300D | User Manual - Page 1
AUDIO-VIDEO CONTROL CENTER KRF-V9300D KRF-V8300D KRF-V7300D INSTRUCTION MANUAL Declaration of Conformity with regard to the EMC Directive 2004/108/EC Manufacturer: Kenwood Corporation 2967-3 Ishikawa-machi, Hachioji-shi, Tokyo, 192-8525 Japan EU Representative's: Kenwood Electronics Europe BV - Kenwood KRF-V8300D | User Manual - Page 2
USER TO THE PRESENCE OF IMPORTANT OPERATING AND MAINTENANCE (SERVICING) INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE APPLIANCE. AM loop antenna (1) Remote control unit (1) - KRF-V9300D : RC-R0923 - KRF-V8300D : RC-R0831 - KRF-V7300D : RC-R0733 Batteries* (R03) (2) * Batteries are attached to - Kenwood KRF-V8300D | User Manual - Page 3
unless proper ventilation is provided or the manufacturer's instructions have been adhered to. 6. Power Sources - to proper grounding of the mast and supporting structure, grounding of the lead-in (NEC SECTION 810-21) GROUND CLAMP POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250, PART - Kenwood KRF-V8300D | User Manual - Page 4
¤IMPORTANT SAFETY INSTRUCTIONS 3 Special Features 5 How to read this manual 6 iPod models usable with this unit 7 Names and functions of parts 8 Connections 14 - 29 Setup Setup menu and its operations 30 KRF-V7300D Speaker setup -"Easy Setup"- ..... 31 KRF-V9300D and KRF-V8300D Speaker setup - Kenwood KRF-V8300D | User Manual - Page 5
from the speakers connected to this unit, and the video can be reproduced on the TV connected to this unit. \ Auto Room EQ (KRF-V9300D and KRF-V8300D) A setup microphone is provided to measure the properties of the listening room and automatically set up the speakers accordingly. The automatic setup - Kenwood KRF-V8300D | User Manual - Page 6
. • In this manual, KRF-V9300D is used for the illustrations of front panel and rear panel. • The illustrations of the main unit display panel and the examples of operations are shown for the purpose of explanation and may differ from the actual view or operation. 6 KRF-V9300D/KRF-V8300D/KRF-V7300D - Kenwood KRF-V8300D | User Manual - Page 7
on your iPod. Handling precautions • Be sure to read the instruction manual that comes with the iPod you are using. • Certain conditions while using an iPod can cause contents stored on the iPod to be lost. Note that Kenwood - Kenwood KRF-V8300D | User Manual - Page 8
4 Remote sensor 5 VOLUME CONTROL knob 6 PHONES jack 8 KRF-V9300D/KRF-V8300D/KRF-V7300D 7 SPEAKERS A/B/OFF key r Press to select the speakers AUTO/MONO key Press to switch the radio tuning mode between auto tuning and manual tuning. Y Also used to select the recording mode. P ^ INPUT MODE - Kenwood KRF-V8300D | User Manual - Page 9
up during playback and 8 lights up during playpause of the iPod. SP(speaker) A/B The indicator(s) corresponding to the front speakers in use lights up. KRF-V9300D/ KRF-V8300D: AUTO ROOM EQ Lights up during measurement by Auto Room EQ or when Room EQ is on. iPod Lights up when an iPod is connected - Kenwood KRF-V8300D | User Manual - Page 10
of parts Remote control unit KRF-V7300D PTY KRF-V8300D KRF-V7300D SUBTITLE KRF-V7300D AUDIO RECEIVER ON STANDBY DVD PURE AUDIO MODE DOLBY STRAIGHT VIRTUAL DECODE LISTEN MODE AUTO ROOM EQ SETUP TONE ENTER SOUND MULTI CONTROL TOP MENU MENU KRF-V7300D EASY SETUP DVD ENTER - Kenwood KRF-V8300D | User Manual - Page 11
HDMI video output as a result of conversion of an analog video signal. KRF-V8300D/KRF-V7300D: SUBTITLE key Use to operate the Kenwood DVD player.* $ AUDIO key Use to operate the Kenwood DVD player.* KRF-V9300D/KRF-V8300D: PTY key I Press to search a radio station by program type. % DVD key - Kenwood KRF-V8300D | User Manual - Page 12
• * For how to be able to use the keys to operate the Kenwood DVD player, see . Á • The supplied batteries may have shorter lives than ordinary . A fire, explosion or excessive heat generation may result. 12 KRF-V9300D/KRF-V8300D/KRF-V7300D - Kenwood KRF-V8300D | User Manual - Page 13
Before use Operation Operate the remote control unit by pointing it to the remote sensor of this unit. When this unit is in standby mode (which is indicated by lighting of the standby indicator), pressing the [ON] key turns this unit ON. Pressing the [STANDBY] key turns this unit OFF (standby mode - Kenwood KRF-V8300D | User Manual - Page 14
speaker Front speaker When connecting the related system components, be sure to refer to the instruction manuals supplied with the components you are connecting. • Be sure to remove the power cord by assigning the sound of absent channels to other speakers. 14 KRF-V9300D/KRF-V8300D/KRF-V7300D - Kenwood KRF-V8300D | User Manual - Page 15
"HDMI Input"> ,. Flow of video signal The digital video signal input from the HDMI input terminal is output only at the HDMI monitor output terminal. KRF-V9300D only : The video up-conversion function can output the video signal input from the VIDEO, S-VIDEO and COMPONENT VIDEO terminals at the HDMI - Kenwood KRF-V8300D | User Manual - Page 16
unit through HDMI connection (connection B), any video signal input to this unit can be output at the HDMI monitor output terminal. For KRF-V8300D, VIDEO and S-VIDEO signal can be converted to COMPONENT VIDEO signal (connection C). For details, see *. 2 To output the - Kenwood KRF-V8300D | User Manual - Page 17
Connections OPTICAL OPTICAL COAXIAL CD(ASSIGNABLE) VIDEO2 DVD DIGITAL IN AUDIO L R PLAY IN PLAY IN REC OUT PLAY IN REC OUT PLAY IN PLAY IN AUX CD MD/TAPE VIDEO1 VIDEO2 ANTENNA CENTER AUTO ROOM EQ MIC IN iPod 5V 500mA FRONT SURROUND SUB WOOFER SUB WOOFER DVD/6CH IN PRE OUT VIDEO1 - Kenwood KRF-V8300D | User Manual - Page 18
S-VIDEO VIDEO Input (Symbol used in ^) HDMI (Connection B) COMPONENT (Connection C) S-VIDEO (Connection E) VIDEO (Connection D) 7 KRF-V8300D Video player component Output HDMI COMPONENT S-VIDEO VIDEO This Unit AV Control Center Input HDMI COMPONENT S-VIDEO VIDEO Output - Kenwood KRF-V8300D | User Manual - Page 19
Connections Connecting a CD player 1 Connect the audio line: Connection A (digital) or B (analog). AUDIO L R PLAY IN PLAY IN REC OUT PLAY IN REC OUT PLAY IN PLAY IN AUX CD MD/TAPE VIDEO1 VIDEO2 ANTENNA CENTER AUTO ROOM EQ MIC IN iPod 5V 500mA FRONT SURROUND SUB WOOFER SUB WOOFER DVD/ - Kenwood KRF-V8300D | User Manual - Page 20
player and/or TV monitor have the HDMI terminals, it is recommended to use the HDMI connection. (See %.) 20 KRF-V9300D/KRF-V8300D/KRF-V7300D - Kenwood KRF-V8300D | User Manual - Page 21
Connections Connecting a DVD player with multi-channel audio output terminal AUDIO L R PLAY IN PLAY IN REC OUT PLAY IN REC OUT PLAY IN PLAY IN AUX CD MD/TAPE VIDEO1 VIDEO2 ANTENNA CENTER AUTO R MIC IN FRONT SURROUND SUB WOOFER SUB WOOFER DVD/6CH IN PRE OUT AM GND FM 75 r R L R L - Kenwood KRF-V8300D | User Manual - Page 22
player and/or TV monitor have the HDMI terminals, it is recommended to use the HDMI connection. (See %.) 22 KRF-V9300D/KRF-V8300D/KRF-V7300D - Kenwood KRF-V8300D | User Manual - Page 23
Connections Connecting the video recorder component 1 Connect the audio line: Connection B. 2 Connect the video line: Connection A. 3 Connect the TV monitor. Connect as shown in ^. AUDIO L R PLAY IN PLAY IN REC OUT PLAY IN REC OUT PLAY IN PLAY IN AUX CD MD/TAPE VIDEO1 - Kenwood KRF-V8300D | User Manual - Page 24
or the remote control unit provided with it. When the iPod is connected to this unit, it cannot be used to control its operations. 24 KRF-V9300D/KRF-V8300D/KRF-V7300D - Kenwood KRF-V8300D | User Manual - Page 25
Connections Connecting an MD recorder / a cassette deck 1 Connect the audio line: Connection A and B. L R PLAY IN PLAY IN REC OUT PLAY IN AUX CD MD/TAPE B A AUDIO L R PLAY IN PLAY IN REC OUT PLAY IN REC OUT PLAY IN PLAY IN AUX CD MD/TAPE VIDEO1 VIDEO2 ANTENNA CENTER AUTO ROO MIC IN - Kenwood KRF-V8300D | User Manual - Page 26
BACK L] terminal. • When connecting the second set of front speakers or a set of speakers installed in another room, connect them to the [SPEAKER B] terminals. 26 KRF-V9300D/KRF-V8300D/KRF-V7300D - Kenwood KRF-V8300D | User Manual - Page 27
Connections How to connect the wire to terminals 1 Strip the vinyl coating of the wire by a length of about 1 cm. 2 Loosen the knob. 3 Insert the wire. Insert until the metallic conductor becomes invisible. 4 Tighten the knob. 27 English - Kenwood KRF-V8300D | User Manual - Page 28
The broadcast reception cannot be made unless the antennas are connected. Connect the antennas correctly as instructed below. AM loop antenna Install in a position as apart as possible from this unit, the into the room and connect it to the FM 75Ω terminal. 28 KRF-V9300D/KRF-V8300D/KRF-V7300D - Kenwood KRF-V8300D | User Manual - Page 29
Connections Turning this unit ON DVD IN IN CR VIDEO2 IN HDMI MONITOR OUT NITOR OUT L WN K Do not remove this part for your safety. ON STANDBY 1 After completing all of the necessary connections, connect the power cord to a wall power outlet. The standby indicator on the front panel lights - Kenwood KRF-V8300D | User Manual - Page 30
with the same procedure. 3 Perform setup by referring to the page describing the selected item. Setup Menu KRF-V7300D "Easy Setup"* only "Auto Setup" KRF-V9300D and KRF-V8300D only "Manual Setup" "Subw Re-Mix" "Crossover" "LFE Level" "Assignment" "Audio Delay" Common for all models "HDMI Input - Kenwood KRF-V8300D | User Manual - Page 31
(23'3/8") 6m (19'8-7/8") 4m (13'1-7/8") KRF-V7300D Speaker setup -"Easy Setup"- The speaker settings appropriate with certain speaker systems or listening environment. In this case, go through fl. • Easy setup can set only the 7.1 channel system. If the setup for - Kenwood KRF-V8300D | User Manual - Page 32
Setup KRF-V9300D and KRF-V8300D Speaker setup -"Auto Setup"(Auto Room EQ)- The Auto Room EQ function sets up the optimum home an action against the message. See › and check the content of the message and follow the instructions. 32 KRF-V9300D/KRF-V8300D/KRF-V7300D - Kenwood KRF-V8300D | User Manual - Page 33
may cause errors in the results of measurements of the speaker levels and distances. In this case, set up the unit again using "Manual Setup". (See fl.) • If the speakers or speaker placement have changed after auto setup, perform the auto setup again. 33 English - Kenwood KRF-V8300D | User Manual - Page 34
the same error message reappears, contact your nearest Kenwood service counter. "E8 : Time Out" : The measurement took too long time due to a certain cause. ➡ Retry measurement. If the same error message reappears, contact your nearest Kenwood service counter. 34 KRF-V9300D/KRF-V8300D/KRF-V7300D - Kenwood KRF-V8300D | User Manual - Page 35
Setup Confirmation messages "C1 : Phase L" / "C1 : Phase R" : The +/- connection polarity of the front left or right speaker is inverted. ➡ Ensure that the front left or right speaker is connected with correct +/- polarity. "C1 : Phase SL" / "C1 : Phase SR" : The +/- connection polarity of the - Kenwood KRF-V8300D | User Manual - Page 36
of each speaker and its size. 1 Enter the Manual Setup mode. [SETUP] Use [MULTI CONTROL 2/3] to select "Manual Setup". [ENTER] 2 Select "SP Setup". [ Large" Surround speaker "SURR Normal" "SURR Off" 36 KRF-V9300D/KRF-V8300D/KRF-V7300D Setting Subwoofer is connected. Subwoofer is not connected. - Kenwood KRF-V8300D | User Manual - Page 37
Setup Speaker level -"SP Level"- Adjust the volume levels of the speakers so that all of them are approximately identical. 1 Select "SP Level". [SETUP] [MULTI CONTROL 2/3] [ENTER] 2 Select the test tone output method. [MULTI CONTROL 2/3] [ENTER] Display "T.TONE Auto" "T.TONE Manu" "T.TONE Off" - Kenwood KRF-V8300D | User Manual - Page 38
] 2 Set the LFE level. Use [MULTI CONTROL ∞/5] to select the LFE level. [ENTER] The level is adjusted from 0dB to -10dB in1dB step decrements. 38 KRF-V9300D/KRF-V8300D/KRF-V7300D - Kenwood KRF-V8300D | User Manual - Page 39
Input assignment -"Assignment"- The input source for the signal output at the CD (ASSIGNABLE) terminal can be assigned: CD, VIDEO1 or AUX. 1 Select "Assignment". [SETUP] [MULTI CONTROL 2/3] [ENTER] 2 Select the input source to be assigned. Use [MULTI CONTROL ∞/5] to select the input. [ENTER] - Kenwood KRF-V8300D | User Manual - Page 40
the analog video input (VIDEO, S-VIDEO or COMPONENT VIDEO terminal) and the audio input becomes the digital (optical or coaxial) or analog audio input. 40 KRF-V9300D/KRF-V8300D/KRF-V7300D - Kenwood KRF-V8300D | User Manual - Page 41
can be delayed. 1 Select "Audio Delay" in ,. 2 Set the HDMI audio delay. [MULTI CONTROL ∞/5] [ENTER] Display "DELAY Auto" "DELAY Manual" "DELAY Off" Setting Corrects the deviation in time between the output audio and video automatically. Allows the user to correct the - Kenwood KRF-V8300D | User Manual - Page 42
CONTROL //O/ • The functions controllable from the TV are variable depending on the TV model. Refer to the instruction manual for your TV. TV AUDIO IN -"TV Audio In"- When the audio input of the TV is switched "TV Audio In" can be set when "HDMI Link" is on. 42 KRF-V9300D/KRF-V8300D/KRF-V7300D - Kenwood KRF-V8300D | User Manual - Page 43
audio output of the TV and recorder/player component to PCM by referring to their instruction manuals. 6 Switch the TV input to the built-in tuner. Is the input to During speaker setup using test tone − During auto setup (KRF-V9300D and KRF-V8300D) − While the recording mode is set to on − During - Kenwood KRF-V8300D | User Manual - Page 44
/DTS). The input mode is fixed at digital to accelerate the input signal "Digital Manual" processing and eliminate lack of audio at the beginning of playback. The decode mode change in the input signal while "Digital Manual" is selected, press [LISTEN MODE]. 44 KRF-V9300D/KRF-V8300D/KRF-V7300D - Kenwood KRF-V8300D | User Manual - Page 45
Playing music or movie Playback VOLUME CONTROL INPUT SELECTOR AV AUX/iPod Monitoring the input source in the original sound (STRAIGHT DECODE mode) The signal input from a source can be output directly without any sound field effect added to it. STRAIGHT DECODE VOLUME /o Input source keys 1 - Kenwood KRF-V8300D | User Manual - Page 46
• The video other than the HDMI input video cannot be monitored when PURE AUDIO MODE is selected. • KRF-V9300D only The video from the VIDEO, S-VIDEO or COMPONENT VIDEO signal input cannot be monitored even if [LISTEN MODE] or [STRAIGHT DECODE] key is operated. 46 KRF-V9300D/KRF-V8300D/KRF-V7300D - Kenwood KRF-V8300D | User Manual - Page 47
Playing music or movie KRF-V9300D Switching the video resolution ¶ Operation available only on the remote control unit. Press to select the resolution of the HDMI video output as a result - Kenwood KRF-V8300D | User Manual - Page 48
Music Videos TV Shows Video Podcasts Track Track Artist Artist Level 1 Level 2 Level 3 * List : List of selected items Album Album Level 4 Track Track Level 5 48 KRF-V9300D/KRF-V8300D/KRF-V7300D - Kenwood KRF-V8300D | User Manual - Page 49
iPod operation / D iPod /D iPod /Y DISPLAY TIME SHUFFLE REPEAT Play and pause Press [6]. Pressing [6] during play will pause the play. Pressing it again will cancel pausing. The name of the currently playing file is displayed. File skip Press [4] or [¢]. If [4] is pressed in the middle - Kenwood KRF-V8300D | User Manual - Page 50
LFE level can be adjusted. (See °.) The "S" indicator lights when the surround signal consists of a single channel. 50 KRF-V9300D/KRF-V8300D/KRF-V7300D - Kenwood KRF-V8300D | User Manual - Page 51
Surround play using the listen mode Select the listen mode according to the source being played back. LISTEN MODE LISTEN MODE Preparations • Turn the components to be used ON. • Complete . • Select the source you wish to play back with surround sound. • Select the input mode r. ( - Kenwood KRF-V8300D | User Manual - Page 52
on the display panel light as follows. */2 : , , , , or , , , */3 : , , , , , or , , , , */4 : , , , , , , or , , , , , 2ch : , Others : Dual Mono ( , ), 3/0 ( , , ), 3/1 ( , , , ) • For "LFE" and "S" input channel indicators, see p. 52 KRF-V9300D/KRF-V8300D/KRF-V7300D - Kenwood KRF-V8300D | User Manual - Page 53
Surround effects DTS, DTS 96/24 and DTS-ES source Connected audio input jack HDMI, OPTICAL, COAXIAL Listen mode DTS Input signal DTS DTS 96/24 DTS 96/24 ES Matrix DTS-ES Discrete DTS-ES Matrix */2 * 2ch Others /2 2ch Others */2 */3 */2 DTS + Neo:6*3 DTS-ES Discrete*3 DTS-ES Matrix - Kenwood KRF-V8300D | User Manual - Page 54
is selected if no surround back speakers are connected. *4 Cannot be selected depending on the DVD-Audio content. AUDIO PLAY IN Analog Surround effects 54 KRF-V9300D/KRF-V8300D/KRF-V7300D - Kenwood KRF-V8300D | User Manual - Page 55
Surround effects KRF-V9300D and KRF-V8300D Virtual mode These modes allow you to enjoy surround SETUP] (KRF-V7300D), [SETUP], [SOUND], [LISTEN MODE], [ACTIVE EQ] and [TONE] will not be functional.) Adjust the speaker level with the controls of the DVD player. Refer to the Instruction manual of the - Kenwood KRF-V8300D | User Manual - Page 56
stored in the remaining places. PS (Program Service) Name Display Automatically displays the station name manual tuning. (With manual tuning, stereo broadcasts will be received in monaural.) • Some functions and function names may differ for certain countries and areas. 56 KRF-V9300D/KRF-V8300D/KRF - Kenwood KRF-V8300D | User Manual - Page 57
function, the RDS stations must be stored in the preset memory using the RDS AUTO MEMORY function. BAND AUTO MEMORY Presetting radio stations manually The RDS auto memory function assigns preset numbers to RDS stations starting from preset number "1". Therefore, be sure to execute the RDS auto - Kenwood KRF-V8300D | User Manual - Page 58
display and start again. Receiving preset stations in order (P.CALL) P.CALL /D KRF-V9300D KRF-V8300D PTY MULTI CONTROL / P.CALL /D TUNER 1 Press [TUNER] to select tuner as the source. 58 KRF-V9300D/KRF-V8300D/KRF-V7300D Preparations • Execute the RDS auto memory procedure. • Set the broadcast - Kenwood KRF-V8300D | User Manual - Page 59
] changes the contents of the display. Each press switches the display mode as follows: 1 PS (Program Service) name display 2 RT (Radio Text) display 3 Frequency display 1 PS (Program Service) name display: The station name is displayed automatically when an RDS broadcast is received. If no PS data - Kenwood KRF-V8300D | User Manual - Page 60
) are identified automatically and converted into stereo signals that are ready for recording. "RecMode Manual" The digital input signal type at the moment this mode is selected is held throughout this . This is due to the copy guard condition. Recording 60 KRF-V9300D/KRF-V8300D/KRF-V7300D - Kenwood KRF-V8300D | User Manual - Page 61
Adjusting the sound MULTI CONTROL /O ACTIVE EQ ENTER TONE ENTER MULTI CONTROL O/ BASS BOOST ACTIVE EQ ACTIVE EQ mode The optimum acoustic field effect can be selected according to the purpose of playback. Press [ACTIVE EQ]. Each press switches the mode as follows: Display "Active EQ Music" - Kenwood KRF-V8300D | User Manual - Page 62
indicator will light to indicate. Adjust the input level. 1 Use [MULTI CONTROL 2/3] to select "INPUT". 2 [MULTI CONTROL ∞/5] to adjust the input level. Sound adjustment 62 KRF-V9300D/KRF-V8300D/KRF-V7300D - Kenwood KRF-V8300D | User Manual - Page 63
Panorama mode ¶ Pro Logic IIx Music and Pro Logic II Music mode only The acoustic field of the front channels can be expanded till the field of surround channels, which makes it possible to create sound expansion in the front of the listener. 1 Use [MULTI CONTROL 2/3] to select "PANORAMA". Center - Kenwood KRF-V8300D | User Manual - Page 64
this unit. Try switching on the source component. • Some Dolby Digital or DTS software may not be compatible with the Midnight mode. Sound adjustment 64 KRF-V9300D/KRF-V8300D/KRF-V7300D - Kenwood KRF-V8300D | User Manual - Page 65
functions VOLUME CONTROL Listening with headphones 1 Connect headphones to the [PHONES] jack. DIMMER (KRF-V7300D) PHONES DIMMER VOLUME /o MUTE Display dimmer adjustment ¶ KRF-V9300D and KRF-V8300D: Operation available only on the remote control unit. The dimmer function lets you select the - Kenwood KRF-V8300D | User Manual - Page 66
DVD player. Pressing [DVD] allows you to control the connected Kenwood DVD player with this remote control unit. 3 Press each key for DVD player operation. Refer to the operation manual of the DVD players for the detailed operating instructions. (To return to the receiver operation mode, press other - Kenwood KRF-V8300D | User Manual - Page 67
problem, depending on the player used. The input mode is set to digital manual . The software is copy-guarded. The audio of certain broadcasts cannot be switched with this unit. A certain trouble r Refer to the instruction manuals that come with the Troubleshooting Continued 67 English - Kenwood KRF-V8300D | User Manual - Page 68
to NTSC/PAL. Refer to the instruction manual of the video player component. Perform the operation mode for the mode for the Kenwood DVD player you wish to control. or a problem cannot be solved even after checking the list in , it Troubleshooting 68 KRF-V9300D/KRF-V8300D/KRF-V7300D - Kenwood KRF-V8300D | User Manual - Page 69
audio standard developed by Dolby Laboratories. It supports transmission and recording of highquality digital audio signals affecting the bit rates assigned for the video and other services. Compatibility with existing home theater systems incorporating the Dolby ). Troubleshooting 69 English - Kenwood KRF-V8300D | User Manual - Page 70
) is copyright protection technology for prevention of illegal duplication of video contents. It is used in encryption of digital interfaces such as DVI and HDMI. Troubleshooting 70 KRF-V9300D/KRF-V8300D/KRF-V7300D "x.v.Color" and "x.v.Color" logo are trademarks of Sony Corporation. - Kenwood KRF-V8300D | User Manual - Page 71
-V8300D/KRF-V7300D 10.9 kg (24.0 lb) 1. Kenwood follows a policy of continuous advancements in development. For this reason specifications may be changed without notice. 2. The full performance may not be exhibited in an extremely cold location (under a water-freezing temperature). Troubleshooting - Kenwood KRF-V8300D | User Manual - Page 72
For your records Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial numbers whenever you call upon your dealer for information or service on this product. Model Serial Number
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
 |
 |
AUDIO-VIDEO CONTROL CENTER
KRF-V9300D
KRF-V8300D
KRF-V7300D
INSTRUCTION MANUAL
© B60-5740-00/00 (EW/XW)
Declaration of Conformity with regard to
the EMC Directive 2004/108/EC
Manufacturer:
Kenwood Corporation
2967-3 Ishikawa-machi, Hachioji-shi, Tokyo, 192-8525 Japan
EU Representative's:
Kenwood Electronics Europe BV
Amsterdamseweg 37, 1422 AC UITHOORN, The Netherlands