Kenwood KRF-V6400D User Manual - Page 26

Setup HDMI setup The HDMI setup is required to use the component connected to the HDMI terminal or to use the HDMI control functions. MULTI CONTROL HDMI SETUP HDMI SETUP MULTI CONTROL O/ HDMI setup flow The HDMI control functions can be set. 1 Enter the HDMI Setup mode. [HDMI SETUP] Use [MULTI CONTROL ∞/5] to select an item to set. [HDMI SETUP] Display "AUDIO OUT" "LIP SYNC" (KRF-V6400D only) "LINK SET" "POWER CONTROL"*1 "EXIT" Setting Sets the HDMI audio output destination. Adjusts the deviation in time between the output audio and video. Sets whether or not the HDMI control functions are used. Interlocks power ON-OFF of components by means of HDMI control. Exits the HDMI Setup mode. *1 This item can be set when "LINK SET" is set to "ON". 2 Set each item. See the followings for each HDMI control item. Audio Out This function selects whether the output destination of the audio input is the TV or this unit. 1 Select "AUDIO OUT". [HDMI SETUP] Use [MULTI CONTROL ∞/5]. [HDMI SETUP] 2 Set the HDMI audio output destination. [MULTI CONTROL ∞/5] [HDMI SETUP] Display "AMP" "TV" Setting Outputs the audio from the speakers connected to this unit. Outputs the audio from the TV connected to this unit. 3 Go to the next setting. • If "TV" is selected and the audio is not output or is interfered with by noise, set the audio output of the player component to PCM. • If "TV" is selected, adjust the volume on TV. 26 KRF-V6400D/KRF-V5450D