Kenwood KMR-D368BT Instruction Manual - Page 32
Echo Cancel], Device, Delete
![]() |
View all Kenwood KMR-D368BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
TROUBLESHOOTING Bluetooth® SiriusXM® Radio Symptom "SUBSCRIPTION UPDATED - PRESS ENTER TO CONTINUE." "CODE ERROR" "NO CONTENT" "SCAN CANCEL" No Bluetooth device is detected. Bluetooth pairing cannot be made. Echo or noise is heard during a phone conversation. Phone sound quality is poor. Voice calling method is not successful. Sound is being interrupted or skipped during playback of a Bluetooth audio player. Remedy Your subscription is updated. Press the volume knob to continue. Make sure you have entered the correct pass code. ( 14) There is insufficient content to start TuneScan. TuneScan has been aborted. • Search from the Bluetooth device again. • Reset the unit. ( 3) • Make sure you have entered the same PIN code to both the unit and Bluetooth device. • Delete pairing information from both the unit and the Bluetooth device, then perform pairing again. ( 15) • Adjust the microphone unit's position. ( 15) • Check the [ECHO CANCEL] setting. ( 17) • Reduce the distance between the unit and the Bluetooth device. • Move the car to a place where you can get a better signal reception. • Use voice calling method in a more quiet environment. • Reduce the distance from the microphone when you speak the name. • Make sure the same voice as the registered voice tag is used. • Reduce the distance between the unit and the Bluetooth audio player. • Turn off, then turn on the unit and try to connect again. • Other Bluetooth devices might be trying to connect to the unit. Symptom Remedy The connected Bluetooth audio player cannot be controlled. • Check whether the connected Bluetooth audio player supports Audio/Video Remote Control Profile (AVRCP). (Refer to the instructions of your audio player.) • Disconnect and connect the Bluetooth player again. "DEVICE FULL" The number of registered devices has reached its limit. Retry after deleting an unnecessary device. ( 19, DEVICE DELETE) Bluetooth® "N/A VOICE TAG" Make sure the same voice as the registered voice tag is used. "NOT SUPPORT" The connected phone does not support Voice Recognition feature or phonebook transfer. "NO ENTRY"/"NO PAIR" There is no registered device connected/found via Bluetooth. "ERROR" Try the operation again. If "ERROR" appears again, check if the device supports the function you have tried. "NO INFO"/"NO DATA" Bluetooth device cannot get the contact information. "HF ERROR XX"/ "BT ERROR" Reset the unit and try the operation again. If this does not solve the problem, consult your nearest service center. 28 ENGLISH
![](/manual_guide/products/kenwood-kmrd368bt-instruction-manual-65e0d2a/32.png)