Kenwood KMM-103RY Instruction Manual - Page 6

Getting Started

Page 6 highlights

GETTING STARTED 2 Set the clock and date 1 Press the volume knob to enter [FUNCTION]. 2 Turn the volume knob to select [CLOCK], then press the knob. To adjust the clock 3 Turn the volume knob to select [CLOCK ADJUST], then press the knob. 4 Turn the volume knob to make the settings, then press the knob. Hour Minute 5 Turn the volume knob to select [CLOCK FORMAT], then press the knob. 6 Turn the volume knob to select [12H] or [24H], then press the knob. To set the date 7 Turn the volume knob to select [DATE FORMAT], then press the knob. 8 Turn the volume knob to select [DD/MM/YY] or [MM/DD/YY], then press the knob. 9 Turn the volume knob to select [DATE SET], then press the knob. 10 Turn the volume knob to make the settings, then press the knob. Day Month Year or Month Day Year 11 Press and hold to exit. To return to the previous setting item, press . 3 Set the initial settings 1 Press repeatedly to enter STANDBY. 2 Press the volume knob to enter [FUNCTION]. • Pressing AUD enters [AUDIO CONTROL] directly. 3 Turn the volume knob to select an item (see the following table), then press the knob. 4 Repeat step 3 until the desired item is selected or activated. 5 Press and hold to exit. To return to the previous setting item, press . AUDIO CONTROL SWITCH PREOUT SP SELECT DISPLAY EASY MENU TUNER SETTING PRESET TYPE SYSTEM KEY BEEP SOURCE SELECT BUILT-IN AUX P-OFF WAIT Default: XX REAR/SUB-W or REAR/SUBWOOFER: Selects whether rear speakers or a subwoofer are connected to the line out terminals on the rear (through an external amplifier). ( 17) OFF/5/4/6×9/6/OEM: Selects according to the speaker size (5 inches or 4 inches, 6×9 inches or 6 inches) or OEM speakers for optimum performance. (For ) When entering [FUNCTION]... ON: ZONE 1 illumination changes to white color. ; OFF: ZONE 1 illumination remains as [COLOR SELECT] color. ( 11) • ZONE 2 illumination changes to white color when you enter [FUNCTION], irregardless of the [EASY MENU] setting. • Refer to the illustration on page 11 for ZONE identification. NORMAL: Memorizes one station for each preset button in each band (FM1/FM2/FM3/MW/LW). ; MIX: Memorizes one station for each preset button, regardless of the selected band. ON: Activates the keypress tone. ; OFF: Deactivates. ON: Enables AUX in source selection. ; OFF: Disables. ( 9) Applicable only when the demonstration mode is turned off. Sets the duration when the unit will automatically turn off (while in standby mode) to save the battery. 20M: 20 minutes ; 40M: 40 minutes ; 60M: 60 minutes ; OFF - - - or WAIT TIME - - -: Cancels 4 ENGLISH

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36

4
Set the clock and date
1
Press the volume knob to enter
[FUNCTION]
.
2
Turn the volume knob to select
[CLOCK]
, then press the knob.
To adjust the clock
3
Turn the volume knob to select
[CLOCK ADJUST]
, then press the knob.
4
Turn the volume knob to make the settings, then press the knob.
Hour 
Minute
5
Turn the volume knob to select
[CLOCK FORMAT]
, then press the knob.
6
Turn the volume knob to select
[12H]
or
[24H]
, then press the knob.
To set the date
7
Turn the volume knob to select
[DATE FORMAT]
, then press the knob.
8
Turn the volume knob to select
[DD/MM/YY]
or
[MM/DD/YY]
, then press
the knob.
9
Turn the volume knob to select
[DATE SET]
, then press the knob.
10
Turn the volume knob to make the settings, then press the knob.
Day 
Month 
Year or Month 
Day 
Year
11
Press and hold
to exit.
To return to the previous setting item, press
.
Set the initial settings
1
Press
repeatedly to enter STANDBY.
2
Press the volume knob to enter
[FUNCTION]
.
• Pressing
AUD
enters
[AUDIO CONTROL]
directly.
3
Turn the volume knob to select an item (see the following table),
then press the knob.
4
Repeat step
3
until the desired item is selected or activated.
5
Press and hold
to exit.
To return to the previous setting item, press
.
Default:
XX
AUDIO CONTROL
SWITCH PREOUT
REAR
/
SUB-W
or
REAR
/
SUBWOOFER
: Selects whether rear speakers
or a subwoofer are connected to the line out terminals on the rear
(through an external amplifier).
(
17)
SP SELECT
OFF
/
5/4
/
6×9/6
/
OEM
: Selects according to the speaker size (5 inches
or 4 inches, 6×9 inches or 6 inches) or OEM speakers for optimum
performance.
DISPLAY
EASY MENU
(For
)
When entering
[FUNCTION]
...
ON
: ZONE 1 illumination changes to white color. ;
OFF
: ZONE 1 illumination remains as
[COLOR SELECT]
color.
(
11)
ZONE 2 illumination changes to white color when you enter
[FUNCTION]
, irregardless of the
[EASY MENU]
setting.
Refer to the illustration on page 11 for ZONE identification.
TUNER SETTING
PRESET TYPE
NORMAL
: Memorizes one station for each preset button in each band
(FM1/FM2/FM3/MW/LW). ;
MIX
: Memorizes one station for each preset
button, regardless of the selected band.
SYSTEM
KEY BEEP
ON
: Activates the keypress tone. ;
OFF
: Deactivates.
SOURCE SELECT
BUILT-IN AUX
ON
: Enables AUX in source selection. ;
OFF
: Disables.
(
9)
P-OFF WAIT
Applicable only when the demonstration mode is turned off.
Sets the duration when the unit will automatically turn off (while in
standby mode) to save the battery.
20M
: 20 minutes ;
40M
: 40 minutes ;
60M
: 60 minutes ;
OFF – – –
or
WAIT TIME – – –
: Cancels
3
GETTING STARTED
2
ENGLISH