Kenwood KCA-BT200 Instruction Manual - Page 12

Function Operation Registering Bluetooth device To make your Bluetooth device (cell-phone or audio player) usable with this unit, you need to register it (pairing). You can register up to five Bluetooth devices to this unit. When registering from Bluetooth devices 1 Turn on the control unit. 2 Start registering a unit by operating the Bluetooth device. By operating the Bluetooth device, register the hands-free unit or audio player (pairing). Select "KCA-BT200" from the list of connected units. 3 Enter a PIN code Model-A, B, C: Input the PIN code registered as mentioned in (page 13). Model-D, E, F: Enter "0000" as a PIN code. Check that registration is complete on the Bluetooth device. 4 By operating the Bluetooth device, start hands- free or audio connection. If "Pairing Success"/"PAIRING OK"/"PAIR OK" is displayed, registration is completed. 6 Return to the device list Model-A, C: Press the [38] button (Control knob). Model-B: Press the [FNC] button. 7 End device registration Exit Menu mode. ⁄ • You can also register from the Bluetooth device side. For the PIN code necessary for registration, see (page 12). • This unit allows up to eight digits to be input for a PIN code. If a PIN code cannot be input from this unit, it can be input from the Bluetooth device. • If there are 5 or more Bluetooth devices registered, you cannot register a new Bluetooth device. • If the error message appears even though the PIN code is correct, try (page 12). • For how to operate the Bluetooth device, refer to the Instruction Manual that comes with your Bluetooth device. When registering from this unit (Function of Model-A/ Model-B/ Model-C) 1 Select the Bluetooth Device registration mode Select the "Device Regist"/ "DVS REGIST"/ "DVS REG"/ "DVC REG" display. 2 Press the [38] button (Control knob) for at least 1 second. Search for the Bluetooth device. When search is completed, "Finished" is displayed. 3 Select the Bluetooth Device Push the Control knob upward or downward to select the Bluetooth device. Press the [38] button (Control knob) to determine the selection. 4 Input the PIN code Operation type Operation Select the numbers. Push the Control knob towards up or down. Move to the next digit. Push the Control knob towards left. Delete the last digit. Push the Control knob towards right. 5 Transmit the PIN code Press the Control knob for at least 1 second. 12 | KCA-BT200 Function of Model-A/ Model-B/ Model-C Registering Special Bluetooth device Allow registration of a special device that cannot be registered normally (pairing). 1 Select the special device registration mode Select the "SPCL DVC Select"/"S-DVC SELECT"/ "SDVC SEL" display. 2 Model-A, B: Press the [38] button (Control knob) for at least 1 second. Model-C: Press the Control knob for at least 1 second. 3 Select a device name Push the Control knob upward or downward to select a device name. Press the [38] button (Control knob) to determine the selection. If "Completed"/"Complete" is displayed, registration of the special device is completed. 4 Go through the procedure of (page 12) and complete the registration (pairing).