Kenwood HM-333 User Manual - Page 43

43 Timer operation 2 Set the time at which you want to start playback or reception (On time). 1 Adjust the time. The time is returned The time is advanced volume / multi control 2 Set it. set / demo CD ÷ In other areas than the U.K. and Europe the clock shows the time of the day in the 12-hour system. ÷ The ON time can be set in steps of 5 minutes. ÷ If you make a mistake, press the menu key and restart from step 1. To check or modify the reservation contents, restart the timer reservation from the beginning. 3 Reserve the timer operation. TIMER 4 Put the unit in standby mode. POWER Each press switches the timer as follows. 1 "O.T.T." 2 "PROG. 1 " 3 "PROG. 1 2 " 4 "PROG. 1 2 " 5 Extinguished ÷ Press the remote's TIMER key repeatedly until "O.T.T." lights up. ÷ To cancel the timer reservation after it has been activated, press the TIMER key while the unit is ON so that all of the timer-related indicators are turned off. (The setting made above is still left in memory.) ÷ When the O.T.T. timer is set while the PROG.1 or PROG.2 timer has been set, the reservation by the PROG.1 or PROG.2 timer is canceled. ÷ When the unit enters the Standby mode, the standby/timer indicator lights in green. ÷ If there is a power failure or the power cord is unplugged after the timer reservation has been activated, the standby/timer indicator blinks in green. In this case, the clock setting should be restarted from the beginning. Application section