Kenwood DVF-3080 Instruction Manual - Page 10

10 Connecting to a TV with Component input terminals Video cord Audio cord TV COMPONENT VIDEO INPUT Y CB CR R L AUDIO VIDEO INPUT COAXIAL R L OUT OUT AUDIO VIDEO OPTICAL DIGITAL OUT (PCM/BIT STREAM) Rear panel example (DVF-8100 for Europe) Y CB CR OUT COMPONENT VIDEO System Connections DVF-3080/DVF-8100 (EN/K,P,E,X,Y) AV Preparations Component cords (Commercially available) $ "TV Output Select (only for Europe)" Connecting to an Audio component For playback of DTS audio, please connect an AV receiver or an AV amplifier which can decode DTS by digital con- nection. Audio cord Coaxial or Optical cable (Commercially available) Only DVF-8100 for Europe TV R L AUDIO VIDEO INPUT COAXIAL OPTICAL DIGITAL INPUT COAXIAL R L OUT OUT AUDIO VIDEO AV receiver or AV Amplifier OPTICAL DIGITAL OUT (PCM/BIT STREAM) Rear panel example (DVF-8100 for Europe) Y CB CR OUT COMPONENT VIDEO Video cord or Component cords (Commercially available) (9) Amplifier equipped with 2-channel analog stereo or Dolby Pro Logic II / Pro Logic: Connect the left and right AUDIO OUT jacks on the DVD player to the audio left and right IN jacks on your amplifier, receiver, or stereo system, using the audio cables. Amplifier equipped with 2-channel digital stereo (PCM) or a multi-channel decoder (Dolby Digital™, MPEG 2, or DTS): Connect one of the DVD Player's DIGITAL OUT jacks (COAXIAL or OPTICAL) to the corresponding in jack on your amplifier. Use an optional digital (coaxial or optical) cable. Notes 1. In case an associated system component is connected, also read the instruction manual of the component. 2. If the audio format of the digital output does not match the capabilities of your receiver (amplifier), the receiver produces a strong, distorted sound or no sound at all. 3. Insert the optical-fiber cable straight into the connector until it clicks. 4. Never bend or bundle the optical-fiber cable.