Jenn-Air JUBFR242HL Owners Manual 1 - Page 10
Installation And Door Closing
View all Jenn-Air JUBFR242HL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
INSTALLATION AND DOOR CLOSING Your beverage center has four leveling legs. If your beverage center seems unsteady or you want the door to close more easily, adjust the beverage center's tilt using the instructions below. WARNING 2. Move the beverage center into its final location. 3. Turn the leveling legs to the right to lower the beverage center, or turn the leveling legs to the left to raise it. It may take several turns of the leveling legs to adjust the tilt of the beverage center. NOTE: Having someone push against the top of the beverage center takes some weight off the leveling legs. This makes it easier to adjust the leveling legs. Electrical Shock Hazard Plug into a grounded 3 prong outlet. Do not remove ground prong. Do not use an adapter. Do not use an extension cord. Failure to follow these instructions can result in death, fire, or electrical shock. 1. Plug into a grounded 3 prong outlet. WARNING Excessive Weight Hazard Use two or more people to move and install beverage center. Failure to do so can result in back or other injury. 4. Open the door and check that it closes as easily as you like. If not, tilt the beverage center slightly more to the rear by turning both front leveling screws to the right. It may take several more turns, and you should turn both leveling legs the same amount. When Moving Your Beverage Center: Your beverage center is heavy. When moving the beverage center for cleaning or service, be sure to cover the oor with cardboard or hardboard to avoid oor damage. Always pull the beverage center straight out when moving it. Do not wiggle or "walk" the beverage center when trying to move it, as oor damage could occur. 10