Jenn-Air JS42PPDUDE Owners Manual - Page 36
Application Guidelines/Water Supply Parameters
View all Jenn-Air JS42PPDUDE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
PERFORMANCE DATA SHEET ■■ It is important that operational, maintenance, and filter replacement ■■ The water system must be installed in compliance with state and local requirements be carried out for the product to perform as advertised. laws and regulations. Property damage can occur if all instructions are not followed. ■■ Do not use with water that is microbiologically unsafe or of unknown ■■ The disposable cartridge must be changed at least every 6 months. quality without adequate disinfection before or after the system. ■■ Use replacement filter P1RFWB2L, Part #EDR3RXD1/EDR3RXD1B. 2015 suggested retail price of $49.99 U.S.A. /$54.95 Canada. Prices are subject Systems certified for cyst reduction may be used on disinfected waters that may contain filterable cysts. EPA Est. No. 082047-TWN-001 to change without notice. ■■ Refer to the "Warranty" section (in the User Instructions or User Guide) ■■ The filter monitor system measures the amount of water that passes for the Manufacturer's limited warranty, name and telephone number. through the filter and alerts you when it is time to replace the filter. To learn how to check the water filter status, see "Using the Controls" or Application Guidelines/Water Supply Parameters "Water Filtration System" in the User Instructions or User Guide. Water Supply Potable City or Well ■■ After changing the water filter, flush the water system. See "Water and Ice Dispensers" or "Water Dispenser" in the User Instructions or User Water Pressure 30-120 psi (207 - 827 kPa) Guide. Water Temperature 33°-100°F (0.6° - 37.8°C) ■■ These contaminants are not necessarily in your water supply. While testing was performed under standard laboratory conditions, actual Service Flow Rate 0.5 gpm (1.89 Lpm) @ 60 psi (413.7 kPa) performance may vary. ■■ The product is for cold water use only. *Class I particle size: >0.5 to