Jenn-Air JMW2427WS Use and Care - Page 9
To Disable Sabbath Mode, Temperature Change, To Change Temperature, Oven Calibration, Restore
![]() |
View all Jenn-Air JMW2427WS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
9. On double ovens, repeat steps 1-8 to set the second cavity, if desired. WARNING Food Poisoning Hazard Do not let food sit in oven more than one hour before or after cooking. Doing so can result in food poisoning or sickness. NOTE: Do not use Delay Start for items that require a preheated oven, such as cakes, cookies and breads. If food is in the oven during preheat, it may become overcooked. 10. To set a Delayed Start, press the quickset pad next to Delay Start. See the "Delay Start" section for additional information. 11. Press START to begin heating the oven. 12. Press CANCEL OVEN (CANCEL UPPER or CANCEL LOWER on double oven models) to turn off the oven. To Disable Sabbath Mode: When a cook time ends, the Sabbath Mode enable screen will be displayed. You can also return to the Sabbath Mode enable screen at any time while using Sabbath Mode by pressing CANCEL. Touch SABBATH MODE: OFF to disable Sabbath Mode and return to the Clock display screen. To program a new cycle, follow steps 1-12 in the "To Use Sabbath Mode" section. Temperature Change: The oven temperature can be changed when the oven is in Sabbath Mode. No tones will sound, and the display will not change. While the oven is running, pressing a number keypad and the Start button will change the temperature after a random delay of between 25 and 40 seconds. Number keys 1 through 0 represent temperatures. Use the following chart as a guide. Number Keypad Oven Temperature 1 170°F (77°C) 2 200°F (93°C) 3 225°F (121°C) 4 250°F (135°C) 5 300°F (149°C) 6 325°F (163°C) 7 350°F (177°C) 8 375°F (191°C) 9 400°F (204°C) 0 450°F (232°C) To Change Temperature: 1. Touch the number keypad for the desired temperature from the chart. 2. Touch START. NOTE: On double ovens, if both ovens are operating in Sabbath Mode, the temperature on both ovens will change to the new setting. Oven Calibration 1. From the Setup menu, touch the MORE button until Oven Calibration appears. 2. Touch the quickset pad next to Oven Calibration. 3. On double models, touch UPPER OVEN or LOWER OVEN to choose the oven cavity to be checked or calibrated. 4. Adjust the calibration of the oven by choosing the temperature offset: -1° (if oven is too hot) or +1° (if oven is too cool). 5. Select Save after entering the desired value. 6. Press START. Restore Factory Settings 1. From the Setup Menu, touch the MORE button until Restore Factory Defaults appears. 2. Touch the quickset pad next to Restore Factory Defaults. 3. The following settings will be lost: Language, Temperature Units, Clock Settings, Date and Screen Appearance. The Welcome Guide will appear to help you reset these settings. See "Welcome Guide" in the "Control Panel" section for additional information. Kitchen Timer This is an independent timer not associated with the cook timers. 1. Press the Kitchen Timer button anytime needed. 2. Enter the desired time (00:00:00) using the number keypad. 3. Press the quickset pad next to Cancel Timer to cancel the function or press Start. 4. While the Kitchen Timer is running, the timer is minimized to the bar at the bottom of the screen. 5. To adjust the Kitchen Timer, press the Kitchen Timer button and choose between Cancel Timer, Hide, or Reset by pressing the quickset pads next to them. 6. If Cancel Timer is pressed, the timer is canceled and the panel is closed. 7. If Hide is pressed, the panel is lowered to the appropriate position. Pressing the Kitchen Timer button will also hide the panel. 8. If Reset is pressed, the Kitchen Timer is kept open but resets to (00:00:00); a new value can now be entered. 9. When the Kitchen Timer is complete, a beep will sound. 10. After time expires, it is possible to add extra time by pressing the quickset pad next to Add More Time or to cancel the function by pressing the quickset pad next to Cancel Timer. 11. To add more time, use the number keypad. 12. Press START. 9
![](/manual_guide/products/jennair-jmw2427ws-use-care-9e01b8e/9.png)