Jenn-Air JIC4715GS Use and Care - Page 7
Flexible Size Cooking Area, Automatic Cooking, Bridge, Pause, To Start Automatic Cooking
View all Jenn-Air JIC4715GS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Flexible Size Cooking Area Flexible Cooking Areas - All Cooking Zones A. Maximum flex cooking area: 7" (180 mm) diameter The Flexible Size Cooking Area offers the flexibility to cook using different sizes of cookware. Cookware sizes can range up to a maximum diameter of 7" (18.0 cm). Automatic Cooking All cooking areas have the Automatic Cooking function. To Start Automatic Cooking: 1. Touch the Power keypad. The indicator light above the Power keypad will light up. 2. Touch or slide the power slider to the desired power level and hold for approximately 3 seconds. The area display will show the selected power level blinking with an "A." The cooking area will heat at maximum power for a set amount of time that is controlled by the electronic control for the cooking time. After the controlled time is met, the cooking area power will decrease to the desired power level and continue cooking. To Stop Automatic Cooking: 1. Touch or slide the power slider to a desired power level between "0" and "9." The area display will show the power level selected. At power levels "1" through "9," the cooking area will continue to operate at the chosen power level. At power level "0," the cooking area will turn off. Bridge The Bridge function allows you to use two cooking areas as one extra-large cooking area. The Bridge function can be activated when cooking areas are on or when they are off. To Turn On the Bridge: 1. Touch the Power keypad. The indicator light above the Power keypad will light up. 2. Turn on either cooking area using the On/Off switch. 3. Touch anywhere on the sliders for both cooking areas at the same time. "U" and "∩" symbols will appear. 4. To increase or decrease the power for the Bridge cooking area, slide the slider of the cooking area showing the power level to the desired power level. Both cooking areas are changed together, but they only use one power slider. To Turn Off the Bridge: 1. Touch anywhere on the sliders for both cooking areas in the Bridge at the same time. The power level "0" will appear for both cooking areas. 2. Touch or slide the power slider to Off to turn off the desired cooking area. 3. Touch the Power keypad to turn off the cooktop when finished. The power to the cooktop will automatically turn off 10 seconds after both of the cooking areas are turned off. When using the Bridge function, cookware can have a maximum diameter of 10" (25.4 cm). A. Maximum single cookware area: 10" (25.4 cm) diameter NOTE: The Performance Boost function cannot be used on the cooking areas using the Bridge function. Pause The Pause function stops all of the cooking areas in a zone temporarily and allows restarting each cooking area at the same setting. To Use: 1. Touch the Pause keypad. The display light for Pause will turn on and a Pause symbol "l l" will show in the cooktop zone being paused. Both cooking areas in the zone will be paused. To Turn Off: 1. Cancel the Pause function by touching the Power keypad twice, and then touch the Pause keypad while the display light is flashing. The Pause display light will turn off, the previous cooking area setting(s) will be displayed, and both of the cooking areas in the zone will continue working at their previous power levels. 7