Jenn-Air JES1750FS Installation Instruction - Page 24
Natural Gas Conversion
View all Jenn-Air JES1750FS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Natural Gas Conversion WARNING 6. Unscrew the metal cover and unscrew the blue regulator cap. Keep the washer in place. A A B C Tip Over Hazard A child or adult can tip the range and be killed. Install anti-tip bracket to floor or wall per installation instructions. Slide range back so rear range foot is engaged in the slot of the anti-tip bracket. Re-engage anti-tip bracket if range is moved. Do not operate range without anti-tip bracket installed and engaged. Failure to follow these instructions can result in death or serious burns to children and adults. 1. Turn manual shut-off valve to the closed position. B A C A. To range B. Shut-off valve (closed position) C. Gas supply line 2. Unplug range or disconnect power. To Convert Gas Pressure Regulator (LP Gas to Natural Gas) 1. Move the range out from the wall. 2. Locate the gas pressure regulator at the lower right corner on the back of the range. A A. Metal cover B. Washer C. Blue regulator cap 7. Flip the blue regulator cap over and screw it back into the metal cover. A B A. LP gas position B. Natural gas position 8. Screw the metal cover securely back into place. Do not overtighten. To Convert Surface Burners (LP Gas to Natural Gas) 1. If they are installed, remove the burner grates. 2. Remove the burner caps. 3. Remove the burner base. B C D A A. Igniter electrode B. Burner cap C. Gas tube opening D. Burner base A. Gas pressure regulator IMPORTANT: Do not remove the gas pressure regulator. 3. Remove the front lower panel of the range. 4. Disconnect the blower motor electrical connections. 5. Disconnect the downdraft blower bellows from the range. 24