Jenn-Air JDRP636HM Quick Reference Sheet - Page 2

TONES A tone will sound when: • The unit is powered on • The unit switches to off mode • A valid mode and temperature selection has been made and the Start button is pressed to begin a cycle • An invalid Start button selection is made • There is an error with the unit • Preheating has been completed • The timer from the app has ended (the tone will sound every five minutes until the timer is stopped) • A WiFi event is occurring • The Meat probe connects/disconnects WIFI CONNECTIVITY WiFi Connectivity and Remote Operation Models are provided with a WiFi module that allows the unit to be remotely operated. The control is capable of monitoring and performing remote operations once the remote enabling function sequence is properly initiated at the appliance. Download the App The first step to get your appliance connected is to download the app on your mobile device. The app will be your guide and walk you through all of the steps. Download the app by visiting Google Play or iTunes. To connect your appliance: 1. Follow the prompts in the app to create an account. 2. Locate SAID Label, refer to right side of front frame. For more information on WiFi Connectivity, reference the Use and Care Guide. LIGHT INDICATORS AND BEHAVIORS FUNCTION USE & LIGHT BEHAVIOR Start Button The Start button will flash white after 2 seconds to prompt the user to press start after the mode and temperature have been selected. If no action is taken after 2 minutes, a tone will sound and the unit will timeout and return to idle mode. To exit idle mode, re-select a mode and temperature before pressing start. If an invalid knob combination has been chosen and the Start button is pressed, the indicator light will quickly blink and a tone will sound to indicate that the chosen selection is invalid. See the functions table for valid selections. Set mode and temperature knobs to desired selection. The Start button will blink white when ready. Press the Start button to begin cycle. WiFi Indicator Light The WiFi indicator light illuminates white when the unit is WiFi enabled. All lights will turn off in Idle mode. Remote Indicator Light The Remote indicator light illuminates white when the unit is remote enabled. All lights will turn off in Idle mode. Temp/Mode Knob Indicator Light When a temp or setting is selected, and the mode is valid, the temp/mode indicator lights will illuminate white. When the Start button has been pressed, the knob indicator light will turn white and pulse until preheat is completed. The light will turn solid white and a tone will sound when preheat is complete. If there is no preheat for a cycle, the preheat completes immediately and the light turns solid white. If an invalid mode and temperature combination has been selected, the knob light will quickly blink and a tone will sound prompting the user to select a valid combination. The indicator light will continue to blink and a tone will sound every 30 seconds until the error is fixed or timeout after 2 minutes of inactivity. The temperature knob will blink amber if the oven is too hot to proof or if a 100+ degree decrease in temperature is in progress i.e. changing from Bake 450 to Bake 350. Griddle Cooktop Right Griddle indicator light - The Griddle Cooktop On light illuminates blue On Light when the griddle knob is powered on. Griddle Preheat Light Left Griddle indicator light - The griddle Preheat light flashes blue while the griddle is preheating. Once preheat temperature has been reached, the indicator light turns solid blue.