Jenn-Air JBRFR30IG Owners Manual - Page 28

Water Filtration System

Page 28 highlights

WATER FILTRATION SYSTEM MODEL P9WB2L/P9RFWB2L/EDR2RXD1 CAPACITY 200 GALLONS (757 LITERS) System tested and certified by NSF International against NSF/ANSI Standard 42, Standard 53, Standard 401, and CSA B483.1 for the reduction of contaminants specified on the Performance Data Sheet. This system has been tested according to NSF/ANSI Standards 42, 53, 401, and CSA B483.1 for the reduction of the substances listed below. The concentration of the indicated substances in water entering the system was reduced to a concentration less than or equal to the permissible limit for water leaving the system, as specified in NSF/ANSI Standards 42, 53, 401, and CSA B483.1. Substance Reduction Aesthetic Effects Chlorine Taste/Odor Particulate Class I* Contaminant Reduction Lead: @ pH 6.5 / @ pH 8.5 Benzene p - Dichlorobenzene Carbofuran Toxaphene Atrazine Asbestos Live Cysts† Turbidity Lindane Tetrachloroethylene O-Dichlorobenzene Ethylbenzene 1,2,4-Trichlorobenzene 2,4 - D Styrene Toluene Endrin Atenolol Trimethoprim Linuron Estrone Nonylphenol Influent Challenge Concentration 2.0 mg/L ± 10% At least 10,000 particles/mL Influent Challenge Concentration 0.15 mg/L± 10% 0.015 mg/L ± 10% 0.225 mg/L ± 10% 0.08 mg/L ± 10% 0.015 ± 10% 0.009 mg/L ± 10% 107 to 108 fibers/L†† 50,000/L min. 11 NTU ± 10% 0.002 ± 10% 0.015 mg/L ± 10% 1.8 mg/L ± 10% 2.1 mg/L ± 10% 0.210 mg/L ± 10% 0.210 mg/L ± 10% 2.0 mg/L ± 10% 3.0 mg/L ± 10% 0.006 mg/L ± 10% 200 ± 20% 140 ± 20% 140 ± 20% 140 ± 20% 1400 ± 20% Maximum Permissible Product Water Concentration 50% reduction 85% reduction Maximum Permissible Product Water Concentration 0.010 mg/L 0.005 mg/L 0.075 mg/L 0.040 mg/L 0.003 mg/L 0.003 mg/L 99% 99.95% 0.5 NTU 0.0002 mg/L 0.005 mg/L 0.60 mg/L 0.70 mg/L 0.07 mg/L 0.07 mg/L 0.1 mg/L 1.0 mg/L 0.002 mg/L 30 ng/L 20 ng/L 20 ng/L 20 ng/L 200 ng/L Average% Reduction 97.2% 99.5% Average% Reduction >99.3% / 98.6% 96.0% >99.8% 91.9% 93.3% 92.4% >99% >99.99% 99.0% 98.9% >96.6% >99.9% 99.4% >99.8% 93.8% 99.8% 87.9% >96.6% >95.9% >96.9% >96.4% >97.0% >97.4% 28 | ASSISTANCE

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64

28 | ASSISTANCE
WATER FILTRATION SYSTEM
MODEL P9WB2L±P9RFWB2L±EDR2RXD1 CAPACITY 200 GALLONS ³757 LITERS´
This system has been tested according to NSF/ANSI Standards 42, 53, 401, and CSA B483.1 for the reduction of the substances listed below. The concentration of the
indicated substances in water entering the system was reduced to a concentration less than or equal to the permissible limit for water leaving the system, as specified in
NSF/ANSI Standards 42, 53, 401, and CSA B483.1.
Substance Reduction
Aesthetic Effects
Influent Challenge Concentration
Maximum Permissible Product
Water Concentration
Average%
Reduction
Chlorine Taste/Odor Particulate Class I*
2.0 mg/L ± 10% At least 10,000 particles/mL
50% reduction 85% reduction
97.2% 99.5%
Contaminant Reduction
Influent Challenge
Concentration
Maximum Permissible Product
Water Concentration
Average%
Reduction
Lead: @ pH 6.5 / @ pH 8.5
0.15 mg/L± 10%
0.010 mg/L
>99.3% / 98.6%
Benzene
0.015 mg/L ± 10%
0.005 mg/L
96.0%
p - Dichlorobenzene
0.225 mg/L ± 10%
0.075 mg/L
>99.8%
Carbofuran
0.08 mg/L ± 10%
0.040 mg/L
91.9%
Toxaphene
0.015 ± 10%
0.003 mg/L
93.3%
Atrazine
0.009 mg/L ± 10%
0.003 mg/L
92.4%
Asbestos
10
7
to 10
8
fibers/L
††
99%
>99%
Live Cysts
50,000/L min.
99.95%
>99.99%
Turbidity
11 NTU ± 10%
0.5 NTU
99.0%
Lindane
0.002 ± 10%
0.0002 mg/L
98.9%
Tetrachloroethylene
0.015 mg/L ± 10%
0.005 mg/L
>96.6%
O-Dichlorobenzene
1.8 mg/L ± 10%
0.60 mg/L
>99.9%
Ethylbenzene
2.1 mg/L ± 10%
0.70 mg/L
99.4%
1,2,4-Trichlorobenzene
0.210 mg/L ± 10%
0.07 mg/L
>99.8%
2,4 - D
0.210 mg/L ± 10%
0.07 mg/L
93.8%
Styrene
2.0 mg/L ± 10%
0.1 mg/L
99.8%
Toluene
3.0 mg/L ± 10%
1.0 mg/L
87.9%
Endrin
0.006 mg/L ± 10%
0.002 mg/L
>96.6%
Atenolol
200 ± 20%
30 ng/L
>95.9%
Trimethoprim
140 ± 20%
20 ng/L
>96.9%
Linuron
140 ± 20%
20 ng/L
>96.4%
Estrone
140 ± 20%
20 ng/L
>97.0%
Nonylphenol
1400 ± 20%
200 ng/L
>97.4%
System tested and certified by NSF International against NSF/ANSI Standard 42, Standard 53, Standard 401, and CSA
B483.1 for the reduction of contaminants specified on the Performance Data Sheet.