Invacare TDXSP2X-MCG Owners Manual - Page 38
Controlling the maximum speed, Swipe-and-tap mode, Tap mode
![]() |
View all Invacare TDXSP2X-MCG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
LiNX® Control System If the joystick is moved back to the neutral position, the wheelchair slows down and stops. If the joystick is released from any position other than the neutral position, the joystick returns to the neutral position and the wheelchair slows down and stops. The joystick can also be used to wake up the system when in sleep mode, if this parameter has been enabled by the provider. Refer to 5.12 The sleep mode, page 50. 5.4.2 Controlling the maximum speed The speedometer is divided into ten segments, representing the speed range of the wheelchair. Each segment can be displayed in one of three colors. 38 • The green section A displays the speed range, determined by the set point E on the speed slider D. • The yellow section B displays the pre-set maximum speed range C, depending on the programming of the drive card. • The grey section F displays that the total maximum speed range of the wheelchair is not reached in the depending drive function. In each drive card you are able to control the pre-set maximum speed depending on your needs. 1. Swipe-and-tap mode Tap mode Slide set point E up or down, when in Swipe-and-tap mode. Tap at top or at button of speed slider D, when in Tap mode. Plus and minus symbols indicate where to tap. The proportion of the green sections A and yellow sections B on the speedometer and the speed slider correspond to the position of the set point E. 60101834-A
![](/manual_guide/products/invacare-tdxsp2-owners-manual-020df32/38.png)