Invacare TDXSP2 Owners Manual 5 - Page 29
Speed reduction and seating function inhibits, Speed reduction, Seating function inhibits, Tilt
View all Invacare TDXSP2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
None Unspecified 5.6.3 Speed reduction and seating function inhibits The mentioned speed reduction and seating function inhibits do not apply to all Invacare wheelchair models. Speed reduction If the elevating seat has been adjusted above a certain point, the drive electronics considerably reduces the speed of the wheelchair. If speed reduction has been activated, drive mode can only be used to carry out movements in reduced speed and not for regular driving. To drive normally, adjust the elevating seat until the speed reduction has been deactivated again. Usage Speed reduction is shown in the status display. If the elevating seat is raised above a certain point, the elevating seat symbol and the drive symbol start pulsing. These two symbols remain pulsing while driving to show the speed reduction until speed reduction has been deactivated again. Seating function inhibits • Tilt limit The maximum tilt limit switch is a function to prevent the backrest angle from extending beyond a maximum pre-set angle, when the elevating seat is raised above a certain point. The drive electronics stops automatically and the seat tilt or backrest symbol starts pulsing. 60101835-A 29