Invacare TDXSISEAT Owners Manual 4 - Page 22
Using the Powered Seating Switch, Using the MK6i SPJ+ w/ACC Joystick
View all Invacare TDXSISEAT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
5 USAGE SYSTEM TYPE Single Actuator (Elevate Only) JOYSTICK MK6i SPJ+ w/PSS MK6i SPJ+ w/ACC CMPJ+ POWERED SEATING CONTROL 4 POLE MOTOR SWITCH OPTION THROUGH THE JOYSTICK (TTJ) Powered Seating Switch No Yes Yes with SANODE This procedure only applies to wheelchairs with Formula PTO Plus or Power Tilt Only seating systems. Using the Powered Seating Switch The powered seating switch can be used with all joysticks. The powered seating switch will alternate functions (increase tilt angle, decrease tilt angle) after it has been released for a minimum of three seconds. 1. Make sure the wheelchair is on a level surface. 2. Press the powered seating switch once to activate the actuator. 3. Press the powered seating switch again (after at least 3 seconds) to activate the actuator in the opposite direction. Using the MK6i SPJ+ w/ACC Joystick For this procedure, refer to FIGURE 1 on page 23. 1. Make sure the wheelchair is on a level surface. 2. Press the mode button to switch from driving mode to tilt mode. Invacare® Van Seat 22 Part No 1143195