Invacare SOLARA3GLS5 Owners Manual - Page 43
Angle Adjustment, Detail A - Side, View of Footplate and, Footrest Support
View all Invacare SOLARA3GLS5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
3. Retighten the two flat screws and locknuts. The setting for positioning the footplate on the half clamp may vary for each footplate. 7 FRONT RIGGINGS 4. Repeat STEPS 1-3 for opposite footplate, if desired. Angle Adjustment 1. Loosen, but DO NOT remove the adjustment screw in the half clamp. 2. Position the footplate to the necessary angle to accommodate the user (Detail "A"). 3. Retighten the adjustment screw. Torque to over 90 in-lbs, but no more than 300 in-lbs. 4. Repeat STEPS 1-3 for opposite footplate, if desired. 5. Screw in or out until the adjustable angle flip-up footplate is perpendicular to the footrest assembly or the desired inversion/eversion is obtained. 90° Footrest Support Footrest Support Flat Screws Footplate Detail "A" - Side View of Footplate and Footrest Support Footplate Half Clamp Footplate Hinge Adjustment Screw FIGURE 5 Adjusting Adjustable Angle Flip-Up Footplates Locknuts Part No 1154295 43 Invacare® Solara®3G/Spree 3G Wheelchair