Invacare IFX-20C Owners Manual 2 - Page 45
Securing the Occupant, 6.13.1 Wheelchair-Anchored Belts
View all Invacare IFX-20C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
6.13 Securing the Occupant 6.13.1 Wheelchair-Anchored Belts WARNING! Risk of Injury, Damage or Death Lack or improper use of wheelchair transport systems may result in injury, damage or death. -Use both pelvic and upper torso belts. -The pelvic belt that is provided by Invacare has been tested for use in a motor vehicle on this wheelchair only. Do not replace the pelvic belt with a different style pelvic belt. 6 Transport - ANSI/RESNA WC-4 Section 19 The wheelchair has been provided with a pelvic belt which meets the requirements of ANSI/RESNA WC/19. The pelvic belt provided by Invacare has been designed to accommodate use on either side of the vehicle. 1. Install the pelvic belt pin A into large end of slot B in the belt mounting bracket C. Pull upwards until it snaps into place. Rotate downward and forward until it snaps into place into the small end of the slot. There are two pin locations E on the pelvic belt that are used to secure the vehicle-anchored torso belt. 2. Repeat step 1 for the opposite belt mounting bracket. 3. Install the vehicle-anchored upper torso belt onto the two pin E locations on the pelvic belt. 60101876-C 45