Invacare 9153645182 Owners Manual - Page 52
Anti-tippers/wheel Locks
View all Invacare 9153645182 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
10 ANTI-TIPPERS/WHEEL LOCKS Installing Anti-Tippers To ensure the correct model anti-tipper is used refer to chart below. Measurements for anti-tippers are approximate and are taken with extension tube in bottom hole position. WHEELCHAIR MODEL TRACER EX2 TRACER EX2 FF SEAT-TO-FLOOR HEIGHT IN INCHES 17½ to 19½ 21 ANTI-TIPPER (MEASUREMENTS IN INCHES) LENGTH HEIGHT MODEL PART NO. 13½ 3¼ 1360 1058836 12 2¾ 9758 1086190 Anti-Tipper Height Flat Surface Bottom Position Anti-Tipper Length FIGURE 1 Installing Anti-Tippers - Anti-Tipper Length 1. Press the release buttons and insert the anti-tippers with the antitipper wheels pointing toward the ground/floor into the wheelchair frame tubing. 2. Ensure that the release button of the anti-tipper fully protrudes out of the hole in the bottom of the wheelchair frame tubing. Anti-Tipper Wheels Anti-Tipper Anti-Rattle 3. Place the wheelchair on a flat surface. 4. Measure the distance between the bottom of the anti-tipper wheels and the ground/floor. Release Buttons Rear Frame Tubing FIGURE 2 Installing Anti-Tippers Invacare® Tracer™ EX2 Wheelchair 52 Part No 1110546