Intel BOXDG41KR Product Specification - Page 15
System Memory
View all Intel BOXDG41KR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Product Description For information about Power supply connectors Refer to Section 2.2.2.3, page 49 1.5 System Memory The board has two DIMM sockets and supports the following memory features: • 1.9 V, 2.0 V, and 2.1 V DDR3 SDRAM DIMMs with gold plated contacts, with the option to raise the voltage to support higher performance DDR3 SDRAM DIMMs • Dual channel interleaved mode support • Unbuffered, single-sided or double-sided DIMMs with the following restriction: Double-sided DIMMs with x16 organization are not supported. • 4 GB maximum total system memory. Refer to Section 2.1.1 on page 39 for information on the total amount of addressable memory. • Minimum total system memory: 512 MB • Non-ECC DIMMs • Serial Presence Detect • DDR3 1066 MHz or DDR3 800 MHz SDRAM DIMMs NOTE To be fully compliant with all applicable DDR SDRAM memory specifications, the board should be populated with DIMMs that support the Serial Presence Detect (SPD) data structure. This enables the BIOS to read the SPD data and program the chipset to accurately configure memory settings for optimum performance. If non-SPD memory is installed, the BIOS will attempt to correctly configure the memory settings, but performance and reliability may be impacted or the DIMMs may not function under the determined frequency. Table 3. Supported Memory Configurations DIMM Type SDRAM Technology Smallest Usable DIMM (one x16 Single-sided DIMM) Largest Usable DIMM (one x8 Double-sided DIMM) DDR3 800 DDR3 1066 512 Mbit 512 Mbit 256 MB 256 MB 2 GB 2 GB Maximum Capacity with Two Identical x8 Double-sided DIMMs 4 GB 4 GB For information about... Tested Memory Refer to: http://support.intel.com/support/motherboards/desktop/sb/ CS-025414.htm 15