Intel BOXD915PCML Product Specification - Page 40
Power Connector, 13.2.2, Fan Connectors
UPC - 735858166607
View all Intel BOXD915PCML manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Intel Desktop Board D915PCY/D915PCM Technical Product Specification Resume on Ring enables telephony devices to access the computer when it is in a power-managed state. The method used depends on the type of telephony device (external or internal). NOTE The use of Resume on Ring and Wake from USB technologies from an ACPI state requires an operating system that provides full ACPI support. 1.13.2.1 Power Connector ATX12V-compliant power supplies can turn off the system power through system control. When an ACPI-enabled system receives the correct command, the power supply removes all non-standby voltages. When resuming from an AC power failure, the computer returns to the power state it was in before power was interrupted (on or off). The computer's response can be set using the Last Power State feature in the BIOS Setup program's Boot menu. For information about The location of the main power connector on the D915PCY board The location of the main power connector on the D915PCM board The signal names of the main power connector Refer to Figure 18, page 60 Figure 19, page 62 Table 29, page 66 1.13.2.2 Fan Connectors The function/operation of the fan connectors is as follows: • The fans are on when the board is in the S0 or S1 state. • The fans are off when the board is off or in the S3, S4, or S5 state. • Each fan connector is wired to a fan tachometer input of the hardware monitoring and fan control ASIC. • All fan connectors support closed-loop fan control that can adjust the fan speed or switch the fan on or off as needed. • All fan connectors have a +12 V DC connection. For information about The location of the fan connectors on the D915PCY board The location of the fan connectors on the D915PCM board The location of the fan connectors and sensors for thermal monitoring for the D915PCY board The location of the fan connectors and sensors for thermal monitoring for the D915PCM board The signal names of the processor fan connector The signal names of the chassis fan connectors Refer to Figure 18, page 60 Figure 19, page 62 Figure 13, page 34 Figure 14, page 35 Table 27, page 65 Table 28, page 65 40