Intel BOXD915GAV Product Specification - Page 13
Manufacturing Options
View all Intel BOXD915GAV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Product Description Table 2. Feature Summary (continued) Expansion Capabilities • PCI Conventional bus connectors (four on the D915GAV; two on the D915GAG) • PCI Express x1 bus add-in card connectors (two on the D915GAV; one on the D915GAG) • One PCI Express x16 bus add-in card connector (both boards) Instantly Available PC Technology • Support for PCI Local Bus Specification Revision 2.2 • Support for PCI Express Revision 1.0a • Suspend to RAM support • Wake on PCI, RS-232, front panel, PS/2 devices, and USB ports Hardware Monitor Subsystem • Hardware monitoring and fan control ASIC • Voltage sense to detect out of range power supply voltages • Thermal sense to detect out of range thermal values • Three fan connectors • Three fan sense inputs used to monitor fan activity • Fan speed control 1.3.2 Manufacturing Options Table 3 describes the manufacturing options on the Desktop Boards D915GAV and D915GAG. Not every manufacturing option is available in all marketing channels. Please contact your Intel representative to determine which manufacturing options are available to you. Table 3. Manufacturing Options ATAPI CD-ROM Connector A connector for attaching an internal CD-ROM drive to the onboard audio subsystem ATX fan connector Additional fan connector for use in larger chassis (D915GAV board only) IEEE-1394a Interface IEEE-1394a controller and three IEEE-1394a connectors (one back panel connector, two front-panel connectors) LAN subsystem The D915GAG board provides one of the following: • Gigabit (10/100/1000 Mbits/sec) LAN subsystem using the Marvel* Yukon* 88E8050 PCI Express Gigabit Ethernet Controller • 10/100 Mbits/sec LAN subsystem using the Intel® 82562EZ Platform LAN Connect (PLC) device • No LAN subsystem SCSI Hard Drive Activity LED Connector Allows add-in hard drive controllers (SCSI or other) to use the same LED as the onboard IDE controller. Serial Port B Second serial port accessible via a connector on the component side of the board S/PDIF Connector A 1 x 3 connector (mounted on the component side of the board) that provides digital audio signals in S/PDIF format Trusted Platform Module (TPM) A component that enhances platform security For information about Available configurations for the Desktop Boards D915GAV and D915GAG Refer to Section 1.4, page 19 13